HOUSTON, TX —
OSHA Inspection: ISIDRO AC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of ISIDRO AC in 2107D ENGELMOHR, HOUSTON, TX 77054 (NAICS 238220). OSHA activity number 344322680.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ISIDRO AC
- Site address
- 2107D ENGELMOHR
- City
- HOUSTON
- State
- TX
- ZIP
- 77054
- Mailing
- 2107D ENGELMOHR, HOUSTON, TX 77054
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 8
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.95 A
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $1,705 · Current $1,705
General-duty citation text
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition when it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact: a) At 2107D Engelmohr, on the fourth level, where an employee sawing through the wooden floor with a Makita Saw Saw was not using eye protection.
Recent events (1)
- — Z (S) $1705
1926.403 B02
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $1,705 · Current $1,705
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) At 2107D Engelmohr, on the ground level where an outlet box powering rechargeable batteries and a Makita Saw Saw was not installed and used in accordance with its labeling. The box was not mounted and the face plate was missing, exposing open conductors.
Recent events (1)
- — Z (S) $1705
1926.404 F06
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) At 2107D Engelmohr, on the fourth level, where the path to ground from a Makita Saw Saw was not continuous.
Recent events (1)
- — Z (S) $0
1926.501 B04 II
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $2,842 · Current $2,842
General-duty citation text
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes by covers: a) At 2107D Engelmohr, on the fourth floor, where three floor holes cut for ducts and had not been covered.
Recent events (1)
- — Z (S) $2842
1926.501 B13
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $1,705 · Current $1,705
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) At 2107D Engelmohr, where the open side of the second floor was not protected by guardrailing.
Recent events (1)
- — Z (S) $1705
1926.1052 C01 II
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: a) At 2107D Engelmohr, where the open side of the stairs between the third and fourth floors was not equipped with a stairrail. b) At 2107D Engelmohr, where the open side of the stairs between the second and third floors was not equipped with a stairrail. c) At 2107D Engelmohr, where the open side of the stairs between the first and the second floors was not equipped with a stairrail.
Recent events (1)
- — Z (S) $0
1926.150 C01 IV
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.150(c)(1)(iv): There was not at least one fire extinguisher located adjacent to stairways on each floor of a multistory building: a) At 2107D Engelmohr, where no fire extinguishers were located inside the four-story townhome.
Recent events (1)
- — Z (O) $0
More inspections at Isidro AC
View Isidro AC's full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344322680.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.