HOUSTON, TX —
OSHA Inspection: LUIS CERVANTES
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of LUIS CERVANTES in 2105C ENGELMOHR, HOUSTON, TX 77054 (NAICS 238330). OSHA activity number 344324496.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LUIS CERVANTES
- Site address
- 2105C ENGELMOHR
- City
- HOUSTON
- State
- TX
- ZIP
- 77054
- Mailing
- 2027 THUNIG, HOUSTON, TX 77055
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238330
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.150 C01 IV
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $2,273 · Current $2,273
General-duty citation text
29 CFR 1926.150(c)(1)(iv): There was not at least one fire extinguisher located adjacent to stairways on each floor of a multistory building: a) At 2105C Engelmohr, where no fire extinguishers were available inside the town house.
Recent events (1)
- — Z (S) $2273
1926.304 H01
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $3,031 · Current $3,031
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a) At 2105C Engelmohr, where the portable table saw used to cut flooring material lacked a guard enclosing the portion of the saw blade above the table and above the material being cut.
Recent events (1)
- — Z (S) $3031
1926.501 B13
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $2,273 · Current $2,273
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) At 2105C Engelmohr, where the open side of the second floor was not equipped with a guardrail system.
Recent events (1)
- — Z (S) $2273
1926.1052 C01 II
- Issued
- Oct 3, 2019
- Abate by
- Oct 4, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: a) At 2105C Engelmohr, where the open side of the stairway between the third and fourth floors was not equipped with a stairrail system. b) At 2105C Engelmohr, where the open side of the stairway between the second and third floors was not equipped with a stairrail system. c) At 2105C Engelmohr, where the open side of the stairway between the first and second floors was not equipped with a stairrail system.
Recent events (1)
- — Z (S) $0
More inspections at Luis Cervantes
View Luis Cervantes's full OSHA safety record →
More inspections in this industry (NAICS 238330)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344324496.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.