Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIDWAY MACHINING INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MIDWAY MACHINING INC in 1060 GRAVEL BANK RD, MARIETTA, OH 45750 (NAICS 332710). OSHA activity number 344356902.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Midway Machining INC — free Get an email when a new federal OSHA severe-injury report for Midway Machining INC is published. One employer, no account, unsubscribe in one click.
Site address
1060 GRAVEL BANK RD
City
MARIETTA
State
OH
ZIP
45750
Mailing
1060 GRAVEL BANK RD, MARIETTA, OH 45750
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
10
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 7 exposed
Issued
Dec 6, 2019
Abate by
Dec 18, 2019
Penalty
Initial $1,932 · Current $1,352 Reduced
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  a. Located at 1060 Gravel Bank Road, Marietta, Ohio: On or about October 04, 2019, the employer did not ensure that employees were trained and evaluated to be proficient while they operated the powered industrial vehicle (PIV) such as, but not limited to the Caterpillar forklift, Model GC25K, Serial Number: AT82090576.
Recent events (2)
  • — I (S) $1352.4
  • — Z (S) $1932

1910.178 L02 II

Serious Gravity 5 1 instance 7 exposed
Issued
Dec 6, 2019
Abate by
Dec 18, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(2)(ii): Training shall consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.  a. Located at 1060 Gravel Bank Road, Marietta, Ohio: On or about October 04, 2019, the employer did not establish or maintain a validated platform to train and evaluate the employees on PIVs. The employees operated the PIV such as, but not limited to the Caterpillar forklift, Model GC25K, Serial Number: AT82090576 at the work place, without being properly assessed and trained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G01

Serious Gravity 5 1 instance 7 exposed
Issued
Dec 6, 2019
Abate by
Dec 18, 2019
Penalty
Initial $2,416 · Current $1,691 Reduced
29 CFR 1910.1200(g)(1): Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use.  a.  Located at 1060 Gravel Bank Road, Marietta, Ohio: On or about October 04, 2019, the employer did not have the Safety Data Sheet (SDS) for the propane used for the power industrial vehicle (PIV), that was used at the worksite.
Recent events (2)
  • — I (S) $1691.2
  • — Z (S) $2416

1910.132 D02

Other-than-serious 1 instance 7 exposed
Issued
Dec 6, 2019
Abate by
Dec 20, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  a. Located at 1060 Gravel Bank Road, Marietta, Ohio: On or about October 04, 2019, the employer did not certify the hazard assessment for the workplace. The employer did not sign to certify the hazard assessment in the Shop Safety Guidelines Manual.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344356902.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.