OSHA Inspection: CORE & MAIN LP

Issued

Mar 3, 2020

Abate by

Mar 27, 2020

Penalty

Initial $7,711 · Current $4,774 Reduced

General-duty citation text

29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating:    (a): Outside Facility - Fuel containers were not securely mounted to prevent jarring loose, slipping or rotating. The locating pin for the fuel container on Toyota forklift #1 was not properly installed. The locating pin for Toyota forklift #2 was missing, on or about October 7, 2019.    Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).

Issued

Mar 3, 2020

Abate by

Mar 27, 2020

Penalty

Initial $13,494 · Current $7,959 Reduced

General-duty citation text

29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment:    (a): Workshop -  The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment. A hazard assessment was not completed related to PPE requirements for the welding and cutting work done. Employees performing arc welding and arc cutting work were not utilizing protective clothing or proper eye and face protection, on or about, October 7, 2019.     Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Mar 3, 2020

Abate by

Mar 27, 2020

Penalty

Initial $13,494 · Current $7,959 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(i)(A): Helmets or hand shields were not used during all arc welding or arc cutting operations:    (a): Workshop - Helmets or hand shields were not used during all arc welding or arc cutting operations. An employee was plasma arc cutting without a helmet or hand shield, on or about, October 7, 2019.     Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Mar 3, 2020

Abate by

Mar 27, 2020

Penalty

Initial $13,494 · Current $7,959 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:    (a): Workshop Welding - Workers located in the direct vicinity of welding work were not protected from the rays by noncombustible screens, or appropriate eyewear. Employees in the area did not use tinted eyewear and the welding work was not adequately enclosed by the welding screens, on or about December 20, 2019.     Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).      (b): Workshop Plasma Cutting -  Workers located in the direct vicinity of the plasma cutting were not protected from the rays by noncombustible screens, or appropriate eyewear. The plasma cutting work was not enclosed by any welding screens, on or about December 20, 2019.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Mar 3, 2020

Abate by

Mar 27, 2020

Penalty

Initial $5,783 · Current $3,714 Reduced

General-duty citation text

29 CFR 1910.252(c)(1)(iv): The employer did not include the potentially hazardous materials employed in fluxes, coatings, coverings, and filler metals, all of which are potentially used in welding and cutting, in the program established to comply with Hazard Communication Standard. The employer did not ensure that each employee is trained in accordance with the provisions of � 1910.1200:    (a): Workshop - The employer did not include the potentially hazardous materials employed in fluxes, coatings, coverings, and filler metals, all of which are potentially used in welding and cutting, in the written hazard communication program. The employees were not trained on potentially hazardous materials used in the welding and cutting operation in accordance with the provisions of � 1910.1200, on or about October 7, 2019.    Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).

Issued

Mar 3, 2020

Penalty

Initial $9,639 · Current $5,834 Reduced

General-duty citation text

29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.    (a): Facility - An employee suffered a fingertip amputation on October 3, 2019. The company became aware of the amputation on October 4, 2019. OSHA was notified on October 7, 2019.    There is no abatement certification or documentation required for this item.