PERRY, GA —
OSHA Inspection: STELLAR MANAGEMENT GROUP, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STELLAR MANAGEMENT GROUP, INC. in 250 GA HIGHWAY 247 SPUR, PERRY, GA 31069 (NAICS 561790). OSHA activity number 344366612.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STELLAR MANAGEMENT GROUP, INC.
- Site address
- 250 GA HIGHWAY 247 SPUR
- City
- PERRY
- State
- GA
- ZIP
- 31069
- Mailing
- 412 GEORGIA AVE SUITE 300, CHATTANOOGA, TN 37403
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561790
- Employees
- 134
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 II
- Issued
- Dec 27, 2019
- Abate by
- Jan 24, 2020
- Penalty
- Initial $13,260 · Current $9,282 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: (A) A specific statement of the intended use of the procedure; (B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy; (C) Specific procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the responsibility for them; and (D) Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures. On or about 10/9/2019, in the DSI production area at 250 GA Highway 247 Spur, Perry, GA: The Lockout/Tagout procedures implemented at the facility were not in a language all authorized employees could understand. Employees who were deemed lockout authorized employees did not speak or read English lockout and were provided procedures that were in English only. a) DSI Machine: One on each line 240/420 volts. b) DSI Three Conveyors Lines: Three conveyors one each line 240/420 volts. c) DSI Dumper: One on each line 240/420 volts. In the alternative 29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: On or about 10/9/2019, in the DSI production area at 250 GA Highway 247 Spur, Perry, GA: Employees were exposed to amputation hazards in that the employer failed to ensure that authorized employees full understood how to lockout/tagout a equipment on the DSI production lines. a) DSI Machine: One on each line 240/420 volts. b) DSI Three Conveyors Lines: Three conveyors one each line 240/420 volts. c) DSI Dumper: One on each line 240/420 volts.
Recent events (2)
- — I (S) $9282
- — Z (S) $13260
1910.147 F03 II D
- Issued
- Dec 27, 2019
- Abate by
- Jan 24, 2020
- Penalty
- Initial $13,260 · Current $9,282 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: On or about 10/9/2019, in the DSI production area at 250 GA Highway 247 Spur, Perry, GA: Employees engaged in service and maintenance or the equipment did not apply a lock or tag device on the equipment energy sources. a) DSI Machine: One on each line 240/420 volts. b) DSI Three Conveyors Lines: Three conveyors one each line 240/420 volts. c) DSI Dumper: One on each line 240/420 volts.
Recent events (2)
- — I (S) $9282
- — Z (S) $13260
More inspections at Stellar Management Group, INC.
View Stellar Management Group, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 561790)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344366612.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.