Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MILLIS TRANSFER, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MILLIS TRANSFER, INC. in 3501 I-35W, BURLESON, TX 76028 (NAICS 484121). OSHA activity number 344367297.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Millis Transfer, INC. — free Get an email when a new federal OSHA severe-injury report for Millis Transfer, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3501 I-35W
City
BURLESON
State
TX
ZIP
76028
Mailing
3501 S. BURLESON BLVD, ALVARADO, TX 76009
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
484121
Employees
6
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 II

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 22, 2019
Abate by
Nov 20, 2019
Penalty
Initial $1,705 · Current $1,023 Reduced
29 CFR 1910.178(l)(1)(ii):  The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck:    On or about October 09, 2019, and at times prior thereto, at a workplace located at 3501 S. Burleson Blvd, Alvarado, Texas; employees operated a Komatsu forklift without first completing training consisting of a combination of formal instruction, practical training, and evaluation of his performance.
Recent events (2)
  • — I (S) $1023
  • — Z (S) $1705

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 22, 2019
Abate by
Nov 20, 2019
Penalty
Initial $2,273 · Current $1,364 Reduced
29 CFR 1910.212(a)(1):  Machine guarding was not provided to protect operator(s) and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks;                                                                                                               On or about October 09, 2019, and at times prior thereto, at a workplace located at 3501 S. Burleson Blvd, Alvarado, Texas; employees operated a Dayton drill press, s/n not legible, model # 5000A, with no guard over rotating parts exposing employees to amputation hazards.
Recent events (2)
  • — I (S) $1363.8
  • — Z (S) $2273

1910.253 B04 III

Serious Gravity 5 1 instance 6 exposed
Issued
Oct 22, 2019
Abate by
Nov 20, 2019
Penalty
Initial $2,842 · Current $1,705 Reduced
29 CFR 1910.253(b)(4)(iii):  Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a non-combustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:                                                                                                                On or about October 09, 2019, and at times prior thereto, at a workplace located at 3501 S. Burleson Blvd, Alvarado, Texas; in the maintenance area, the employer stored oxygen cylinders together with flammable acetylene cylinders and other mixture cylinders exposing employees to fire hazards.
Recent events (2)
  • — I (S) $1705.2
  • — Z (S) $2842

1910.303 E01

Serious Gravity 5 1 instance 6 exposed
Issued
Oct 22, 2019
Abate by
Nov 20, 2019
Penalty
Initial $2,842 · Current $1,705 Reduced
29 CFR 1910. 303(e)(1)(ii): Markings were not provided for voltage, current, wattage, and other ratings as necessary:    On or about October 09, 2019, and at times prior thereto, at a workplace located at 3501 S. Burleson Blvd, Alvarado, Texas; the employer had electrical panel boxes that energized equipment with no marked voltage ratings.
Recent events (2)
  • — I (S) $1705.2
  • — Z (S) $2842

1910.1200 E01

Serious Gravity 1 1 instance 5 exposed
Issued
Oct 22, 2019
Abate by
Nov 20, 2019
Penalty
Initial $1,705 · Current $1,023 Reduced
29 CFR 1910. 1200(e)(1): Employer did not develop, implement, and maintain at each work place, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning:     On or about October 09, 2019, and at times prior thereto, at a workplace located at 3501 S. Burleson Blvd, Alvarado, Texas; the employer did not ensure that a written hazard communication program with all the required elements was available at the workplace for employees using chemicals such as antifreeze, engine oil and transmission fluid.
Recent events (2)
  • — I (S) $1023
  • — Z (S) $1705

View Millis Transfer, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344367297.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.