GLENVIEW, IL —
OSHA Inspection: INDEPENDENCE PAINTING CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDEPENDENCE PAINTING CO. in 1801 MILWAUKEE AVE., GLENVIEW, IL 60025 (NAICS 238320). OSHA activity number 344369178.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDEPENDENCE PAINTING CO.
- Site address
- 1801 MILWAUKEE AVE.
- City
- GLENVIEW
- State
- IL
- ZIP
- 60025
- Mailing
- 1233 RAND RD., DES PLAINES, IL 60016
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238320
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.453 B02 V
- Issued
- Feb 25, 2020
- Penalty
- Initial $9,446 · Current $8,500 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or the basket when working from an aerial lift: Note: As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system: a) On October 10, 2019, employees were exposed to the hazard of falling up to approximately 30 feet while working from the JLG 660SJ US aerial lift platform without wearing a full body harness with a lanyard attached to the boom or basket. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $8500
- — Z (S) $9446
1926.501 B01
- Issued
- Feb 25, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On October 10, 2019, employees engaged in painting activity were not protected from fall hazards while working at an elevation of approximately 30 feet above the ground. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.454 A
- Issued
- Feb 25, 2020
- Abate by
- Mar 27, 2020
- Penalty
- Initial $6,747 · Current $0 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: a) On or about October 10, 2019, employer did not provide training to each employee in order to recognize hazards associated with working from aerial lifts and to understand procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $6747
1926.503 A01
- Issued
- Feb 25, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards: a) On or about October 10, 2019, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.102 A01
- Issued
- Feb 25, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: a) On October 10, 2019, employees were exposed to eye and/or face injury while operating the Ultimate MX II Paint Sprayer without eye and/or face protection during painting operations. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238320)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344369178.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.