LEBANON, PA —
OSHA Inspection: I. AUMAN MACHINE COMPANY, INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of I. AUMAN MACHINE COMPANY, INCORPORATED in 1525 JOEL DRIVE, LEBANON, PA 17046 (NAICS 332710). OSHA activity number 344372107.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- I. AUMAN MACHINE COMPANY, INCORPORATED
- Site address
- 1525 JOEL DRIVE
- City
- LEBANON
- State
- PA
- ZIP
- 17046
- Mailing
- 1525 JOEL DRIVE, LEBANON, PA 17046
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 47
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 26, 2020
- Abate by
- Jun 1, 2020
- Penalty
- Initial $9,446 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) 1525 Joel Drive, Lebanon Pennsylvania - The employer did not ensure that machines, including but not limited too: Mazak model H-800, FH-880 and Niigata BHN 80 had specific energy control procedures developed and document to prevent employees from being exposed to potential hazardous energy, on or about October 11, 2019. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $7000
- — Z (S) $9446
1910.184 D
- Issued
- Feb 26, 2020
- Abate by
- Apr 1, 2020
- Penalty
- Initial $4,048 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.184(d): Sling(s) and fastenings were not inspected each day or during use and were not removed from service when damaged or defective: a) 1525 Joel Drive, Lebanon Pennsylvania - The employer did not remove damaged slings from service. Several slings were observed with damage during the inspection, on or about October 11, 2019. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3000
- — Z (S) $4048
1910.184 I01
- Issued
- Feb 26, 2020
- Abate by
- Apr 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material: a) 1525 Joel Drive, Lebanon Pennsylvania - The employer did not ensure that synthetic web slings hung on the railing of machines H6, H8 and N2 were marked to show the rated capacity and type of synthetic web sling, on or about October 11 2019. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.184 I09 III
- Issued
- Feb 26, 2020
- Abate by
- Apr 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(9)(iii): Synthetic web sling(s) with snags, punctures, tears, or cuts were not immediately removed from service: a) 1525 Joel Drive, Lebanon Pennsylvania - The employer did not remove synthetic web slings used on Mazak machines H2, H4 and N1 that had several cuts along the outer edge of the slings, on or before October 11, 2019. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Feb 26, 2020
- Penalty
- Initial $5,398 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) 1525 Joel Drive, Lebanon Pennsylvania - The work rest on the 3/4 horse power Central Machinery 8 inch bench grinder exceeded the maximum 1/8 inch requirement and had a distance of 5/8 of an inch away from the wheel, on or about October 11, 2019. No abatement certification or documentation required.
Recent events (2)
- — I (S) $4000
- — Z (S) $5398
1910.215 B09
- Issued
- Feb 26, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) 1525 Joel Drive, Lebanon Pennsylvania - The tongue guard on the 3/4 horse power Central Machinery 8 inch bench grinder exceeded the maximum 1/4 inch requirement and had a distance of approximately 3/4 of an inch away from the wheel, on or about October 11, 2019. No abatement certification or documentation required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at I. Auman Machine Company, Incorporated
View I. Auman Machine Company, Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344372107.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.