DE PERE, WI —
OSHA Inspection: TRUDELL HOLDINGS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TRUDELL HOLDINGS INC. in 2049 CREAMERY ROAD, DE PERE, WI 54115 (NAICS 532120). OSHA activity number 344377130.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRUDELL HOLDINGS INC.
- Site address
- 2049 CREAMERY ROAD
- City
- DE PERE
- State
- WI
- ZIP
- 54115
- Mailing
- 2049 CREAMERY ROAD, DE PERE, WI 54115
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 532120
- Employees
- 54
- Ownership type
- A
Citations
1 citation on file for this inspection.
1910.213 C01
- Issued
- Oct 31, 2019
- Penalty
- Initial $9,282 · Current $6,497 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be positive, reliable, and in true alignment with the saw; and the mounting shall be adequate in strength to resist any reasonable side thrust or other force tending to throw it out of line: On or about October 2, 2019 the 10" Rigid table saw used for ripping lumber and insulation was not guarded to prevent employee exposure to the rotating saw blade.
Recent events (2)
- — I (S) $6497.4
- — Z (S) $9282
More inspections in this industry (NAICS 532120)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344377130.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.