OLATHE, KS —
OSHA Inspection: HECTOR ARITA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HECTOR ARITA in 25321 W. 105TH TER, OLATHE, KS 66061 (NAICS 238130). OSHA activity number 344393202.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HECTOR ARITA
- Site address
- 25321 W. 105TH TER
- City
- OLATHE
- State
- KS
- ZIP
- 66061
- Mailing
- 7514 GARNETT ST APT 9, SHAWNEE MISSION, KS 66214
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B01
- Issued
- Jan 29, 2020
- Abate by
- Feb 25, 2020
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain programs necessary to ensure compliance with the Occupational Safety and Health Standards: Employees exposed to struck-by and fall hazards. At the jobsite located at 25321 W. 105th Ter Olathe, KS: Employees engaged in framing work using pneumatic nailers and powered tools were exposed to hazards such as struck-by and fall hazards in that the employer had not developed nor implemented safety and health programs that provide construction hazard recognition guidelines to mitigate those hazards.
Recent events (1)
- — Z (S) $4048
1926.100 A
- Issued
- Jan 29, 2020
- Abate by
- Feb 25, 2020
- Penalty
- Initial $1,735 · Current $1,735
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: Employees exposed to struck-by hazards. At the jobsite located at 25321 W. 105th Ter Olathe, KS: Employees engaged in ground hand activities working below employees engaged in framing activities were exposed to struck-by hazards in that head protection was not provided.
Recent events (1)
- — Z (S) $1735
1926.102 A01
- Issued
- Jan 29, 2020
- Abate by
- Feb 25, 2020
- Penalty
- Initial $1,735 · Current $1,735
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: Employees were exposed to struck-by hazards. At the jobsite located at 25321 W. 105th Ter Olathe, KS: Employees engaged in framing activities using pneumatic nailers were exposed to struck-by hazards in that eye protection was not utilized.
Recent events (1)
- — Z (S) $1735
1926.501 B13
- Issued
- Jan 29, 2020
- Abate by
- Feb 25, 2020
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): Employees were exposed to fall hazards. At the jobsite located at 25321 W. 105th Ter Olathe, KS: Employees engaged in residential framing activities, walking the top plates, were exposed to fall hazards of approximately 21 feet from the top plate/eaves of the back exterior to the ground below and 10 feet 06 inches from the inside top plate to plywood floor below in that fall protection was not provided.
Recent events (1)
- — Z (S) $4048
1926.503 A01
- Issued
- Jan 29, 2020
- Abate by
- Feb 25, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: Employees were exposed to fall hazards. At the jobsite located at 25321 W. 105th Ter Olathe, KS: Employees engaged in residential framing activities, walking the top plates, were exposed to fall hazards of approximately 21 feet from the top plate/eaves of the back exterior to the ground below and 10 feet 06 inches from the inside top plate to plywood floor below in that fall protection training was not provided.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238130)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344393202.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.