HOUSTON, TX —
OSHA Inspection: ASSET INTEGRITY MANAGEMENT SOLUTIONS, L.L.C.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ASSET INTEGRITY MANAGEMENT SOLUTIONS, L.L.C. in 1617 PEACH LEAF ST, HOUSTON, TX 77039 (NAICS 541330). OSHA activity number 344398383.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASSET INTEGRITY MANAGEMENT SOLUTIONS, L.L.C.
- Site address
- 1617 PEACH LEAF ST
- City
- HOUSTON
- State
- TX
- ZIP
- 77039
- Mailing
- 1617 PEACH LEAF ST, HOUSTON, TX 77039
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541330
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 14, 2020
- Abate by
- Apr 2, 2020
- Penalty
- Initial $4,241 · Current $2,545 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. On or about October 16, 2019 in the fabrication shop, an employee was exposed to stuck-by and caught-in hazards while performing die changes and maintenance tasks without specific procedures to de-energize the machines.
Recent events (2)
- — I (S) $2544.6
- — Z (S) $4241
1910.215 A02
- Issued
- Feb 14, 2020
- Abate by
- Feb 27, 2020
- Penalty
- Initial $4,241 · Current $2,545 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: On or about October 23, 2019 in the grinding area, employees were exposed to stuck-by hazards when operating a Dayton bench grinder without safety guards to cover the spindle end, nut, and flange projections.
Recent events (2)
- — I (S) $2544.6
- — Z (S) $4241
1910.215 A04
- Issued
- Feb 14, 2020
- Abate by
- Feb 27, 2020
- Penalty
- Initial $4,241 · Current $2,545 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about October 23, 2019 in the grinding area, employees were exposed to struck-by hazards when operating a Dayton bench grinder with a work rest adjusted greater than one eighth inch to the wheel.
Recent events (2)
- — I (S) $2544.6
- — Z (S) $4241
1910.215 B09
- Issued
- Feb 14, 2020
- Abate by
- Feb 27, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: On or about October 23, 2019 in the grinding area, employees were exposed to struck-by hazards when sharpening drill bits with a Dayton bench grinder without tongue guards or a peripheral member able to be adjusted to decreasing diameter of the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Feb 14, 2020
- Abate by
- Feb 27, 2020
- Penalty
- Initial $476 · Current $286 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": On or about October 23, 2019, in the paint room, employees were exposed to fire hazards while painting in a room where the exit did not have an exit sign.
Recent events (2)
- — I (O) $285.6
- — Z (O) $476
More inspections at Asset Integrity Management Solutions, L.L.C.
View Asset Integrity Management Solutions, L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 541330)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344398383.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.