OSHA Inspection: MIMIR GROUP, LLC

Issued

Nov 27, 2019

Abate by

Dec 24, 2019

Penalty

Initial $3,789 · Current $2,652 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedures to ensure that the procedures and requirements of this standard were followed:    JOB SITE: 300A Industrial Drive, Troy, MO 63379, on or about 10/24/2019, the employer fail to conduct an annual inspection of the energy control procedures to ensure that the procedures and requirement were current on but not limited to the following equipment:    a) Mark Andy Presses 1, 2, 3 & 4  b) Pic Rewind  c) Arpeco Rewind

Issued

Nov 27, 2019

Abate by

Dec 24, 2019

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:  JOB SITE: 300A Industrial Drive, Troy, MO 63379, on or about 10/24/2019, the employer exposed employees to potential hazardous energies in that employees were allowed to perform service and/or maintenance on equipment without first being trained to ensure those employees had the knowledge and skills for the safe application, usage, and removal of energy controls on such as but not limited to:  a) Mark Andy Presses 1, 2, 3 & 4 b) Pic Rewind c) Arpeco Rewind

Issued

Nov 27, 2019

Abate by

Dec 24, 2019

Penalty

Initial $3,789 · Current $2,652 Reduced

General-duty citation text

29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap:    JOB SITE: 300A Industrial Drive, Troy, MO 63379, on or about 10/24/2019, in the production area, an orange flexible cord connected to a floor fan, was not used in continuous length without splice or tap.  The flexible cord's insulation was damaged exposing wiring and was wrapped in black electrical tape.  The workers were exposed to a potential electrical hazard.

Issued

Nov 27, 2019

Penalty

Initial $3,789 · Current $2,653 Reduced

General-duty citation text

29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting an in-patient hospitalization, amputation or the loss of an eye:    JOB SITE: 300A Industrial Drive, Troy, MO  63379, on or about 10/24/2019, The employer fail to report within 24-hours a work-related incident resulting in an amputation injury.  The maintenance technician was working on a Print Head moving cart when his right middle and ring fingers tips were amputated.  The incident occurred on October 16, 2019 and was reported to OSHA on October 22, 2019.