Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEORGE H. RUMP CONSTRUCTION CO.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GEORGE H. RUMP CONSTRUCTION CO. in 225 E JACKSON STREET, MORTON, IL 61550 (NAICS 238160). OSHA activity number 344409230.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch George H. Rump Construction CO. — free Get an email when a new federal OSHA severe-injury report for George H. Rump Construction CO. is published. One employer, no account, unsubscribe in one click.
Site address
225 E JACKSON STREET
City
MORTON
State
IL
ZIP
61550
Mailing
3516B W HARMON HWY, PEORIA, IL 61604
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.21 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 12, 2019
Abate by
Dec 12, 2019
Penalty
Initial $1,932 · Current $1,352 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    On or about October 28, 2019, employees using pneumatic nail guns were exposed to eye injuries and each employee was not trained such that they were able to recognize the hazard.
Recent events (2)
  • — I (S) $1352.4
  • — Z (S) $1932

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 12, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  On or about October 28, 2019, employees using pneumatic nail guns were exposed to eye injuries and eye protection was not used.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B10

Serious Gravity 10 1 instance 2 exposed
Issued
Nov 12, 2019
Penalty
Initial $3,978 · Current $2,785 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:    On or about October 28, 2019, employees performing roofing activities were exposed to fall hazards of approximately 18 feet and fall protection was not used.
Recent events (2)
  • — I (S) $2784.6
  • — Z (S) $3978

1926.503 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Nov 12, 2019
Abate by
Dec 12, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  On or about October 28, 2019, employees performing roofing activities were exposed to fall hazards of approximately 18 feet and the employer did not certify that each employee had been trained in the fall protection system to be used.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View George H. Rump Construction CO.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344409230.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.