ALMA, GA —
OSHA Inspection: SPARTAN CARGO TRAILERS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SPARTAN CARGO TRAILERS LLC in 140 BUSINESS BOULEVARD, ALMA, GA 31510 (NAICS 336214). OSHA activity number 344436050.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPARTAN CARGO TRAILERS LLC
- Site address
- 140 BUSINESS BOULEVARD
- City
- ALMA
- State
- GA
- ZIP
- 31510
- Mailing
- P.O. BOX 430, ALMA, GA 31510
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336214
- Employees
- 140
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.219 D01
- Issued
- Apr 22, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $7,374 · Current $4,750 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219 (m) and (o): a) West Wall of Frame Shop - On or about November 6, 2019, the upper drive pulley on the motor that powered the Kalamazoo metal chop saw was not adequately guarded, thus exposing employees to in-running nip points (caught-in hazards). b) East Wall of Frame Shop - On or about November 6, 2019, the drive pulleys on the motor that powered the Kalamazoo metal chop saw were not adequately guarded, thus exposing employees to in-running nip points (caught-in hazards).
Recent events (2)
- — I (S) $4750
- — Z (S) $7374
1910.219 E03 I
- Issued
- Apr 22, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219 (m) and (o) of this section: a) West Wall of Frame Shop - On or about November 6, 2019, the inclined belt drive on the motor that powered the Kalamazoo metal chop saw was not adequately guarded, thus exposing employees to in-running nip points (caught-in hazards). b) East Wall of Frame Shop - On or about November 6, 2019, the inclined belt drive on the motor that powered the Kalamazoo metal chop saw was not adequately guarded, thus exposing employees to in-running nip points (caught-in hazards).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV A
- Issued
- Apr 22, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $7,374 · Current $4,750 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a)Throughout Frame Shop - On or about November 6, 2019 and at times prior to, flexible cords (extension cords) connected to multiple Miller CP-302 arc welding power sources were used in lieu of fixed wiring to energize Miller wire feeders, thus exposing employees to trip hazards and electrical hazards.
Recent events (2)
- — I (S) $4750
- — Z (S) $7374
1910.132 H01
- Issued
- Apr 22, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(h)(1): The employer did not provide personnel protective equipment (PPE) at no cost to employees, except as provided by paragraphs(h)(2) through (h)(6) of this section: a) Throughout Frame Shop - On or about November 6, 2019 and at times prior to, for employees required to wear welding helmets, the employer did not provide the welding helmets to employees at no cost.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.132 H05
- Issued
- Apr 22, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(h)(5): The employer did not provide replacement Personal Protective Equipment to employees when such equipment was required for protection: a) Throughout Frame Shop - On or about November 6, 2019 and at times prior to, for employees required to wear safety glasses, hearing protection, and welding gloves, the employer did not pay for this personal protective equipment with the exception of the original pair that was issued to employees upon hire.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Spartan Cargo Trailers LLC
View Spartan Cargo Trailers LLC's full OSHA safety record →
More inspections in this industry (NAICS 336214)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344436050.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.