Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

BATON ROUGE, LA —

OSHA Inspection: L'AUBERGE

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of L'AUBERGE in 777 L'AUBERGE AVE, BATON ROUGE, LA 70820 (NAICS 721120). OSHA activity number 344444955.

Watch L'Auberge — free Get an email when a new federal OSHA severe-injury report for L'Auberge is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
L'AUBERGE
Site address
777 L'AUBERGE AVE
City
BATON ROUGE
State
LA
ZIP
70820
Mailing
777 L'AUBERGE AVE, BATON ROUGE, LA 70820

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
721120
Employees
820
Ownership type
A

Citations

4 citations on file for this inspection.

1910.151 C

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7711.00 · Current $3856.00 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  a) On or about November 13, 2019, in the workshop; employees were utilizing corrosive epoxy resin) and eye irritant (varnish and wood stain) products without the availability of eye wash stations or any sources of water to flush out eyes.
Recent events (2)
  • — I (S) $3855.5
  • — Z (S) $7711

1910.212 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $5783.00 · Current $2892.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and  a) On or about November 13, 2019 in the back right corner of the workshop; employees utilized a JET model JDP-15B fifteen inch drill press (S# 17061237) to fabricate various woodworking projects without the use of Guards.
Recent events (2)
  • — I (S) $2891.5
  • — Z (S) $5783

1910.1200 H01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $7711.00 · Current $3856.00 Reduced

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On or about November 13, 2019, in the workshop; Employees were utilizing corrosive and eye irritant products such as epoxy resins without being trained on the hazards.
Recent events (2)
  • — I (S) $3855.5
  • — Z (S) $7711

1910.134 C02 I

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  a) On or about November 13, 2019, in the workshop; employees were utilizing 3m model (5201) dual cartridge respirators on a voluntary basis without being trained in their use per Appendix D when using epoxy resin to repair trashcans as well as varnishes and stains.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections in this industry (NAICS 721120)

More inspections in LA

BELLE ROSE, LA—2026-07-14 00:00:00

OXYCHEM

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344444955.