ATLANTIC BEACH, FL —
OSHA Inspection: RIVER CITY CUSTOM CABINETRY, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of RIVER CITY CUSTOM CABINETRY, INC. in 1863 MAYPORT ROAD, ATLANTIC BEACH, FL 32233 (NAICS 337110). OSHA activity number 344444971.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RIVER CITY CUSTOM CABINETRY, INC.
- Site address
- 1863 MAYPORT ROAD
- City
- ATLANTIC BEACH
- State
- FL
- ZIP
- 32233
- Mailing
- 1863 MAYPORT ROAD, ATLANTIC BEACH, FL 32233
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 28
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Feb 14, 2020
- Penalty
- Initial $3,441 · Current $1,721 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a. On or about November 14, 2019, employees were required to wear NIOSH approved, 3M brand, half-face respirators and NIOSH approved, N95 filtering facepiece dustmask respirators when spraying and sanding wood products and the employer did not implement a written respiratory protection program that addressed the worksite-specific procedures such as but not limited to employee medical evaluations, fit testing, and training on the use, maintenance and care of the respirators.
Recent events (2)
- — I (S) $1720.5
- — Z (S) $3441
1910.134 E01
- Issued
- Feb 14, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a. On or about November 14, 2019, employees were required to wear NIOSH approved, 3M brand, half-face respirators and NIOSH approved, N95 filtering facepiece dustmask respirators when spraying and sanding wood products and had not been provided with medical evaluations prior to wearing the respirators.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F01
- Issued
- Feb 14, 2020
- Abate by
- Apr 2, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a. On or about November 14, 2019, employees were required to wear NIOSH approved, 3M brand, half-face respirators and NIOSH approved, N95 filtering facepiece dustmask respirators when spraying and sanding wood products and had not been fit tested prior to initial use of the respirators.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- Feb 14, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a. On or about November 14, 2019, employees were required to wear NIOSH approved, 3M brand, half-face respirators and NIOSH approved, N95 filtering facepiece dustmask respirators when spraying and sanding wood products and had not received respirator training.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 G01 I A
- Issued
- Feb 14, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: a. On or about November 14, 2019, an employee was required to wear a NIOSH approved, N95 filtering facepiece dustmask respirator when sanding wood products in the Finishing Department and had facial hair that came between the sealing surface of the respirator facepiece and the face. a. On or about November 14, 2019, an employee was required to wear a NIOSH approved, 3M brand, half-face respirator when spraying wood products in the Paint Booth and had facial hair that came between the sealing surface of the respirator facepiece and the face.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at River City Custom Cabinetry, INC.
View River City Custom Cabinetry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344444971.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.