Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RUPERTO OLVERA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RUPERTO OLVERA in 1773 RIVIERA DR., WAXAHACHIE, TX 75165 (NAICS 238130). OSHA activity number 344455399.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ruperto Olvera — free Get an email when a new federal OSHA severe-injury report for Ruperto Olvera is published. One employer, no account, unsubscribe in one click.
Establishment
RUPERTO OLVERA
Site address
1773 RIVIERA DR.
City
WAXAHACHIE
State
TX
ZIP
75165
Mailing
427 S. BEACON ST., DALLAS, TX 75223
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Repeat Gravity 10 1 instance 3 exposed
Issued
Nov 20, 2019
Penalty
Initial $7,956 · Current $7,956
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.    On the east side of the construction site, employees engaged in framing activities used pneumatic nail guns and were not provided eye and face protection.  The employees were exposed to struck-by hazards and eye injuries.      Ruperto Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.102(a)(1), which was contained in OSHA inspection number 1151408, citation number 01, item number 002 and was affirmed as a final order on 09/27/2016, with respect to a workplace located at 3332 Balcones Dr., Irving, Texas 75062.
Recent events (1)
  • — Z (R) $7956

1926.501 B13

Repeat Gravity 10 1 instance 3 exposed
Issued
Nov 20, 2019
Penalty
Initial $19,890 · Current $19,890
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).     On the east side of the construction site, employees engaged in framing work without fall protection, were exposed to fall hazards of approximately 11 feet to the lower level.        Ruperto Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1151408, citation number 02, item number 001 and was affirmed as a final order on 09/27/2016, with respect to a workplace located at 3332 Balcones Dr., Irving, Texas 75062.  Ruperto Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1065187, citation number 01, item number 002 and was affirmed as a final order on 09/10/2015, with respect to a workplace located at 3076 Denali Dr., Irving, Texas 75062.
Recent events (1)
  • — Z (R) $19890

1926.405 G02 IV

Other-than-serious 1 instance 3 exposed
Issued
Nov 20, 2019
Penalty
Initial $271 · Current $271
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws.     On the east side of the construction site, employees using an extension cord to energize a Makita skill saw that had the outer sheathing pulled away exposing the internal wiring were exposed to electrical shock hazards.
Recent events (1)
  • — Z (O) $271

View Ruperto Olvera's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344455399.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.