Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAXIM CONSTRUCTION SERVICES, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MAXIM CONSTRUCTION SERVICES, INC. in 5426 BAY CENTER DR, TAMPA, FL 33609 (NAICS 238310). OSHA activity number 344455746.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Maxim Construction Services, INC. — free Get an email when a new federal OSHA severe-injury report for Maxim Construction Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5426 BAY CENTER DR
City
TAMPA
State
FL
ZIP
33609
Mailing
5020 N. COOLIDGE AVE, TAMPA, FL 33614
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238310
Employees
3
Ownership type
A

5 citations on file for this inspection.

1910.1200 E01

Other-than-serious 1 instance 3 exposed
Issued
Jan 3, 2020
Abate by
Feb 21, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59)  a.  At the job site, employees were exposed to drywall joint compound containing silicates during drywall installation and finishing work,  on or about November 19, 2019.
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 3 exposed
Issued
Jan 3, 2020
Abate by
Feb 21, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59)  a. At the job site, employees were exposed to drywall joint compound containing silicates during drywall installation and finishing work, on or about November 19, 2019.
Recent events (1)
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 3 exposed
Issued
Jan 3, 2020
Abate by
Feb 21, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical: (Construction Reference: 1926.59)  a. At the job site, employees were exposed to drywall joint compound containing silicates during drywall installation and finishing work, on or about November 19, 2019.
Recent events (1)
  • — Z (O) $0

1926.20 B02

Other-than-serious 1 instance 3 exposed
Issued
Jan 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  a. At the job site, employees were exposed to electrical hazards during demolition and renovation work, in that, inspections were not conducted to assure that work areas were free from recognized electrical hazards, on or about November 19, 2019.
Recent events (1)
  • — Z (O) $0

1926.454 A

Other-than-serious 1 instance 3 exposed
Issued
Jan 3, 2020
Abate by
Feb 21, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:   a.  At the job site, during drywall and framing work employees were required to use baker scaffolds without being provided with training and education on scaffold safety as required, on or about November 19, 2019.
Recent events (1)
  • — Z (O) $0

View Maxim Construction Services, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344455746.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.