SAINT MARYS, PA ·
OSHA Inspection: ABSOLUTE POWDER COATING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ABSOLUTE POWDER COATING, LLC in 202 GOTZINGER ROAD, SAINT MARYS, PA 15857 (NAICS 332812). OSHA activity number 344457072.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABSOLUTE POWDER COATING, LLC
- Site address
- 202 GOTZINGER ROAD
- City
- SAINT MARYS
- State
- PA
- ZIP
- 15857
- Mailing
- 202 GOTZINGER ROAD, SAINT MARYS, PA 15857
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 8
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.134 C01
- Issued
- Apr 30, 2020
- Abate by
- Jun 17, 2020
- Penalty
- Initial $2,949 · Current $2,064 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: A.) Absolute Powder Coating, LLC. - On or about 11/19/19, and at times prior thereto, employees were required to wear supplied air respirators (Nova 2000) during work tasks including, but not limited to, media blasting. The employer did not develop and implement a written respiratory protection program. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $2064.3
- · Z (S) $2949
1910.134 E01
- Issued
- Apr 30, 2020
- Abate by
- Jun 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: A.) Absolute Powder Coating, LLC. - On or about 11/19/19, and at times prior thereto, employees were required to wear supplied air respirators (Nova 2000) during work tasks including, but not limited to, media blasting. Employees were not provided with a medical evaluation to determine their ability to use a respirator prior to the required use of the respirators. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.134 K01
- Issued
- Apr 30, 2020
- Abate by
- Jun 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1): The employer did not provide effective training to ensure that each employee could demonstrate knowledge of 1910.134(k)(1)(i) - (vii): A.) Absolute Powder Coating, LLC. - On or about 11/19/19, and at times prior thereto, employees were required to wear supplied air respirator (Nova 2000) hoods during work tasks including, but not limited to, media blasting. Employees were not provided with respiratory protection training. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Absolute Powder Coating, LLC
View Absolute Powder Coating, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332812)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344457072.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.