Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: THE FREMONT COMPANY

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of THE FREMONT COMPANY in 150 HICKORY ST., ROCKFORD, OH 45882 (NAICS 311941). OSHA activity number 344458195.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch The Fremont Company — free Get an email when a new federal OSHA severe-injury report for The Fremont Company is published. One employer, no account, unsubscribe in one click.
Establishment
THE FREMONT COMPANY
Site address
150 HICKORY ST.
City
ROCKFORD
State
OH
ZIP
45882
Mailing
150 HICKORY ST., ROCKFORD, OH 45882
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311941
Employees
135
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 27, 2020
Abate by
Apr 17, 2020
Penalty
Initial $8,675 · Current $4,338 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a.)    On or about November 19, 2019, employees were exposed to amputation and crushing injuries when performing activities such as changeover activities on Krones Labeler #1 (Model: Starmatic, Serial #K082489). The employer did not ensure energy control procedures were documented and utilized to properly control the electrical and pneumatic energy before servicing the equipment.
Recent events (2)
  • — I (S) $4338
  • — Z (S) $8675

1910.147 D04 I

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 27, 2020
Abate by
Apr 17, 2020
Penalty
Initial $8,675 · Current $0 Reduced
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:     a.)    On or about November 19, 2019, the employer did not ensure employees were protected while performing service and maintenance activities on Krones Labeler #1 (Model: Starmatic, Serial # K082489). Employees were required to change over activities on Labeler #1 and did not place a lock on the disconnect switch, exposing them to crush hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8675

1910.147 C07 I

Serious Gravity 10 1 instance 6 exposed
Issued
Mar 27, 2020
Abate by
Apr 17, 2020
Penalty
Initial $12,145 · Current $6,072 Reduced
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:     a.)    On or about November 19, 2019, the employer did not ensure that employees were adequately trained in the lockout procedures for the Krones Labeler #1 (Model: Starmatic, Serial #K082489).  Employees did not lock out and tag out the electrical panel while performing changeover activities on equipment including, but not limited to the Labeler #1.
Recent events (2)
  • — I (S) $6072
  • — Z (S) $12145

1910.212 A01

Serious Gravity 10 1 instance 6 exposed
Issued
Mar 27, 2020
Abate by
Apr 17, 2020
Penalty
Initial $12,145 · Current $6,072 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a.)    The employer did not ensure employees were protected while operating Krones Labeler #1 (Model: Starmatic, Serial #K082489). On November 12, 2019, an employee was attempting to remove a label near the rotating paddles when her hand became caught, resulting in injuries requiring hospitalization.
Recent events (2)
  • — I (S) $6072
  • — Z (S) $12145

View The Fremont Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344458195.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.