Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WILLIAMS-SONOMA, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of WILLIAMS-SONOMA, INC. in 3420 URBANCREST INDUSTRIAL DRIVE, GROVE CITY, OH 43123 (NAICS 493190). OSHA activity number 344460852.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Williams-Sonoma, INC. — free Get an email when a new federal OSHA severe-injury report for Williams-Sonoma, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3420 URBANCREST INDUSTRIAL DRIVE
City
GROVE CITY
State
OH
ZIP
43123
Mailing
3420 URBANCREST INDUSTRIAL DRIVE, GROVE CITY, OH 43123
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493190
Employees
87
Ownership type
A

6 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 20, 2019
Penalty
Initial $10,419 · Current $10,419
29 CFR 1910.22(a)(1): (1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition.   a. On and/or before November 20, 2019, in the recycling area, passageways and walking-working surfaces were not kept in a clean and orderly condition due to cardboard boxes, Styrofoam type material, trash, and/or other items which were stored/staged in the area enclosing the baler operation and obstructing entry and exit into and out of the area.
Recent events (2)
  • — I (S) $10419
  • — Z (S) $10419

1910.37 A03

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 20, 2019
Penalty
Initial $52,096 · Current $0 Reduced
29 CFR 1910.37(a)(3): Exit routes must be free and unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route. The exit access must not go through a room that can be locked, such as a bathroom, to reach an exit or exit discharge, nor may it lead into a dead-end corridor. Stairs or a ramp must be provided where the exit route is not substantially level.       a. On and/or before November 20, 2019, in the recycling area, exit routes were not free and unobstructed due to cardboard boxes, Styrofoam type material, trash, and/or other items which were stored/staged in the area enclosing the baler operation and obstructing entry and exit into and out of the area.     Williams Sonoma was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.37(a)(3), which was contained in OSHA inspection number 1018232, citation number 1, item number 1b and was affirmed as a final order on February 26, 2015, with respect to a workplace located at 3301 Veterans Memorial Boulevard, Suite 54 A, Metairie, LA 70002.     Williams-Sonoma Stores, Inc. was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.37(a)(3), which was contained in OSHA inspection number 1188559, citation number 1, item number 1 and was affirmed as a final order on January 17, 2017, with respect to a workplace located at 4047 Westheimer Road, Houston, TX 77027.
Recent events (2)
  • — I (S) $0
  • — Z (R) $52096

1910.212 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 30, 2019
Penalty
Initial $10,419 · Current $10,419
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.       a. On and/or before November 20, 2019, in the recycling area, the Harris/Selco Baler (model: HL-50; S/N: 020170425) was not guarded on the control panel side where an access cover was removed due to damage, thereby exposing employees to struck-by and/or caught-in hazards from moving parts.
Recent events (2)
  • — I (S) $10419
  • — Z (S) $10419

1910.305 B02 I

Other-than-serious 1 instance 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 20, 2019
Penalty
Initial $10,419 · Current $0 Reduced
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear.   a. On and/or before November 20, 2019, in the recycling area, the metal junction box containing electrical conductors for the dock light at door 21 did not have a cover.
Recent events (2)
  • — I (O) $0
  • — Z (S) $10419

1910.303 G01

Other-than-serious 1 instance 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 20, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(1): Space about electric equipment. Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment.      a. On and/or before November 20, 2019, in the recycling area, access and working space around the electrical panels/cabinets was obstructed due to cardboard boxes, Styrofoam type material, trash cans, a pallet, fan, chair, and/or other items which were stored/staged in the area.   Williams-Sonoma Stores, Inc. was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.303(g)(1), which was contained in OSHA inspection number 1188559, citation number 1, item number 2 and was affirmed as a final order on January 17, 2017, with respect to a workplace located at 4047 Westheimer Road, Houston, TX 77027.    Williams-Sonoma Stores, Inc. Store #517 was previously cited for an equivalent violation of this occupational safety and health standard 29 CFR 1910.303(g)(1)(ii), which was contained in OSHA inspection number 1281710, citation number 1, item number 3 and was affirmed as a final order on January 10, 2018, with respect to a workplace located at 5145 Peachtree Parkway, Suite #405, Norcross, GA 30092.
Recent events (2)
  • — I (O) $0
  • — Z (R) $0

1910.305 G01 IV A

Deleted Other-than-serious 2 instances 6 exposed
Issued
Dec 10, 2019
Abate by
Dec 30, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used:   29 CFR 1910.305(g)(1)(iv)(A): As a substitute for the fixed wiring of a structure.     a. On and/or before November 20, 2019, in the recycling area, the Fostoria Industries dock light at door 21 was hardwired into a metal junction box.    b. On and/or before November 20, 2019, in the recycling area, the Fostoria Industries dock light at door 19 was hardwired into a metal junction box.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Williams-Sonoma, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344460852.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.