Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: 3D CUSTOM BUILDERS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of 3D CUSTOM BUILDERS LLC in 1216 W. HIGH ST., NEW PHILADELPHIA, OH 44663 (NAICS 238130). OSHA activity number 344465554.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch 3D Custom Builders LLC — free Get an email when a new federal OSHA severe-injury report for 3D Custom Builders LLC is published. One employer, no account, unsubscribe in one click.
Site address
1216 W. HIGH ST.
City
NEW PHILADELPHIA
State
OH
ZIP
44663
Mailing
5599 MUIRFIELD DRIVE, CANFIELD, OH 44406
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.501 B02 I

Serious Gravity 10 1 instance 3 exposed
Issued
Dec 19, 2019
Abate by
Jan 31, 2020
Penalty
Initial $3,580 · Current $2,506 Reduced
29 CFR 1926.501(b)(2)(i): Each employee who was constructing a leading edge 6 feet or more above lower levels was not protected from falling by guardrail systems, safety net systems, or personal fall arrest systems: Note:  If the employer could demonstrate that it was infeasible or created a greater hazard to use these systems, a fall protection plan meeting the requirements of paragraph (k) of 1926.502 should have been developed and implemented.  a) 3D Custom Builders, LLC located at 1216 W High Ave. New Philadelphia, OH 44663: On and preceding November 22, 2019, the employer did not ensure that employees performing leading edge work, including the placement and securing of wood decking 15 feet above the lower level were protected from falls. No fall protection plan was in place and fall protection devices were not in place.
Recent events (2)
  • — I (S) $2506
  • — Z (S) $3580

1926.501 B04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Dec 19, 2019
Abate by
Jan 16, 2020
Penalty
Initial $2,557 · Current $1,790 Reduced
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.  a) 3D Custom Builders, LLC located at 1216 W High Ave. New Philadelphia, OH 44663: On and preceding November 22, 2019, the employer did not ensure that employees were protected from falling through holes more than 6 feet above the lower level by a PFAS, guardrails or covers. Throughout the process of installing a parapet wall and other framing pieces 15 feet above ground level, employees were working around floor holes created by several gaps in the decking panels.  The gaps between panels least dimension measured between 6" and 30" which exposed employees to falls up to 15 feet.
Recent events (2)
  • — I (S) $1789.9
  • — Z (S) $2557

1926.501 B04 II

Serious Gravity 1 2 instances 4 exposed
Issued
Dec 19, 2019
Abate by
Jan 16, 2020
Penalty
Initial $1,534 · Current $0 Reduced
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes (including skylights) by covers:  a) 3D Custom Builders, LLC located at 1216 W High Ave. New Philadelphia, OH 44663: On and preceding November 22, 2019, the employer did not ensure that employees were protected from tripping in or stepping into or through holes by covers. Throughout the process of constructing walls, setting trusses and framing in a commercial building, employees were working around floor holes located around two structural support beams on the ground level of the building.  The following condition exposed employees to trips from floor holes measuring 9-24" wide and 6" deep.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1534

View 3D Custom Builders LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344465554.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.