CENTER POINT, AL —
OSHA Inspection: XCEL MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of XCEL MASONRY, INC. in OLD SPRINGVILLE ROAD, CENTER POINT, AL 35235 (NAICS 238140). OSHA activity number 344467618.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- XCEL MASONRY, INC.
- Site address
- OLD SPRINGVILLE ROAD
- City
- CENTER POINT
- State
- AL
- ZIP
- 35235
- Mailing
- 848 JAN STREET, ONEONTA, AL 35121
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 11
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 G04 VII
- Issued
- Apr 16, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $5,398 · Current $2,699 Reduced
General-duty citation text
29 CFR 1926.451(g)(4)(vii): Each toprail or equivalent member of a guardrail system was not capable of withstanding, without failure, a force applied in any downward or horizontal direction at any point along its top edge of at least 100 pounds (445 n) or guardrail systems installed on single-point adjustable suspension scaffolds or two-point adjustable suspension scaffolds, and at least 200 pounds (890 n) for guardrail systems installed on all other scaffolds. (a) On or about 11/19/2019 - at Old Springville Road, Center Point, AL 35235, employees were exposed to falls of 14 feet to the ground when they worked from a scaffold with top rails that were not attached to the scaffold because required scaffold parts were missing.
Recent events (2)
- — I (S) $2699
- — Z (S) $5398
1926.452 C04
- Issued
- Apr 16, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $5,398 · Current $2,699 Reduced
General-duty citation text
29 CFR 1926.452(c)(4): End frames of tubular welded frame scaffolding were not locked together vertically by use of pins or equivalent means in areas where uplift could occur: (a) On or about 11/19/2019 - at Old Springville Road, Center Point, AL 35235, employees were exposed to falls of 14 feet to the ground when they worked from an improperly assembled scaffold on which the end frames were not locked together because the required pins were missing.
Recent events (2)
- — I (S) $2699
- — Z (S) $5398
1926.501 B01
- Issued
- Apr 16, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $5,398 · Current $2,699 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a) On or about 11/19/2019 - at Old Springville Road, Center Point, AL 35235, employees were exposed to falls of 15 feet to the ground when they installed bricks on a roof with a parapet wall that was 22 inches in height.
Recent events (2)
- — I (S) $2699
- — Z (S) $5398
More inspections at Xcel Masonry, INC.
View Xcel Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344467618.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.