Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: AQUA FALLS BOTTLED WATERCO

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of AQUA FALLS BOTTLED WATERCO in 7606 DAYTON- SPRINGFIELD RD, FAIRBORN, OH 45324 (NAICS 312112). OSHA activity number 344471412.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Aqua Falls Bottled Waterco for free Get an email when a new federal OSHA severe-injury report for Aqua Falls Bottled Waterco is published. One employer, no account, unsubscribe in one click.
Site address
7606 DAYTON- SPRINGFIELD RD
City
FAIRBORN
State
OH
ZIP
45324
Mailing
7606 DAYTON- SPRINGFIELD RD, FAIRBORN, OH 45324
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
312112
Employees
47
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 3, 2020
Abate by
Apr 17, 2020
Penalty
Initial $12,145 · Current $5,000 Reduced
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.    a) On or about November 22, 2019 the employer had not established or implemented an energy control program for employees performing servicing and maintenance on the CapSnap washer and bottling line.
Recent events (2)
  • · I (S) $5000
  • · Z (S) $12145

1910.178 N04

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 3, 2020
Abate by
Mar 27, 2020
Penalty
Initial $12,145 · Current $5,000 Reduced
29 CFR 1910.178(n)(4): Traveling: The driver shall be required to slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver shall be required to travel with the load trailing.    a) On or about November 13, 2019 an employee was not traveling with the load trailing when it obstructed the forward view.
Recent events (2)
  • · I (S) $5000
  • · Z (S) $12145

1910.212 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Mar 3, 2020
Abate by
Apr 17, 2020
Penalty
Initial $12,145 · Current $5,000 Reduced
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc.    a) On or about November 22, 2019 the CapSnap bottle washer and filling machine did not utilize a guarding method that would prevent employees from getting caught in the pinch point created by the feed side bottle feeder the bottle guide rails.    b) On or about November 22, 2019 the CapSnap decapper did not utilize a guarding method that would prevent employees from getting caught in decapping mechanism.
Recent events (2)
  • · I (S) $5000
  • · Z (S) $12145

1910.1200 E01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Mar 3, 2020
Abate by
Apr 17, 2020
Penalty
Initial $6,940 · Current $0 Reduced
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  a)  On or about November 22, 2019 the employer had not developed or maintained a written hazard communication program for employees who work with chemicals, such as but not limited to, Star Brite (corrosive).
Recent events (2)
  • · I (S) $0
  • · Z (S) $6940

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Mar 3, 2020
Abate by
Mar 27, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.    a)  On or about November 22, 2019 a written certification of a hazard assessment had not been completed by the employer.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344471412.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.