Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: D BAKER ENTERPRISE, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of D BAKER ENTERPRISE, LLC in 9566 HIGHLINE PLACE, WEST CHESTER, OH 45069 (NAICS 238130). OSHA activity number 344475058.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch D Baker Enterprise, LLC — free Get an email when a new federal OSHA severe-injury report for D Baker Enterprise, LLC is published. One employer, no account, unsubscribe in one click.
Site address
9566 HIGHLINE PLACE
City
WEST CHESTER
State
OH
ZIP
45069
Mailing
1536 SHADOWOOD TRL., MAINEVILLE, OH 45039
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 5 exposed
Issued
Feb 18, 2020
Abate by
Mar 2, 2020
Penalty
Initial $4,453 · Current $4,453
29 CFR 1926.20(b)(2): Accident prevention responsibilities. Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.   a) On or about 11/25/2019 there was no frequent and regular inspection program being maintained in use by a competent person to ensure the job site, material and equipment; such as fall protection systems was being utilized.
Recent events (1)
  • — Z (S) $4453

1926.1053 B04

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 18, 2020
Penalty
Initial $4,453 · Current $4,453
29 CFR 1926.1053(b)(4): Use. The following requirements apply to the use of all ladders, including job-made ladders, except as otherwise indicated: Ladders shall be used only for the purpose for which they were designed.   a) On or about 11/25/2019, employee working off an A-frame ladder on top of a lower level roof at heights of 10.7 ft. from the ground.  The ladder was closed, folded and leaning against the structure, not being utilized for the purpose for which it was designed.
Recent events (1)
  • — Z (S) $4453

1926.501 B13

Repeat Gravity 10 2 instances 3 exposed
Issued
Feb 18, 2020
Abate by
Mar 6, 2020
Penalty
Initial $8,905 · Current $8,905
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.  a) On or about 11/25/2019 An employee was framing a new residential property, with no fall protection system in place. Employee was exposed to fall hazard. The height of the fall hazard was measured at 19.8 ft. from the ground, on the (front) south side of the structure.   b) On or about 11/25/2019 Two employees were framing a new residential property, with no fall protection system in place. Employees were exposed to fall hazards. The height of the fall hazard was measured at 27 ft. from the ground, on the (back) north side of the structure.   The D Baker Enterprise, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1115774, citation number 1, item number 1 and was affirmed as a final order on 02/10/2016, with respect to a workplace located at 6895 Roberts Park Dr. Mason, OH 45040.
Recent events (1)
  • — Z (R) $8905

1926.503 A01

Repeat Gravity 10 1 instance 5 exposed
Issued
Feb 18, 2020
Abate by
Mar 2, 2020
Penalty
Initial $8,905 · Current $8,905
29 CFR 1926.503(a)(1): Training program. The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.   a) On or about 11/25/2019 employees have not been trained on fall protection systems and on hazards of falls, while working at heights above 20 ft. from the ground.     The D Baker Enterprise, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.503(a)(1), which was contained in OSHA inspection number 1115774, citation number 1, item number 1 and was affirmed as a final order on 02/10/2016, with respect to a workplace located at 6895 Roberts Park Dr. Mason, OH 45040.
Recent events (1)
  • — Z (R) $8905

View D Baker Enterprise, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344475058.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.