MCKINNEY, TX ·
OSHA Inspection: ANGELICA DOMINGEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ANGELICA DOMINGEZ in 8744 MAJORS CIRCLE, MCKINNEY, TX 75070 (NAICS 238140). OSHA activity number 344475074.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANGELICA DOMINGEZ
- Site address
- 8744 MAJORS CIRCLE
- City
- MCKINNEY
- State
- TX
- ZIP
- 75070
- Mailing
- 1725 AVENUE C., GRAND PRAIRIE, TX 75051
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Jan 14, 2020
- Abate by
- Feb 10, 2020
- Penalty
- Initial $3,410 · Current $0 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) On or about November 25, 2019, employees working while standing on the first tier of scaffolding directly under those working above them; were not protected from a struck-by hazard in that they were not wearing protective helmets. (b) On or about November 25, 2019, employees working on the ground directly under those working above them; were not protected from a struck-by hazard in that they were not wearing protective helmets.
Recent events (2)
- · I (S) $0
- · Z (S) $3410
1926.451 B01 I
- Issued
- Jan 14, 2020
- Abate by
- Feb 10, 2020
- Penalty
- Initial $3,978 · Current $1,800 Reduced
General-duty citation text
29 CFR 1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary: (a) On or about November 25, 2019, an employee working off extensions on the second tier of tubular welded end frame scaffolding was not protected from a fall hazard of approximately thirteen (13) feet and six inches in that the scaffolding was not fully planked. (b) On or about November 25, 2019, an employee working on the first tier of tubular welded end frame scaffolding was not protected from a fall hazard of approximately seven feet in that the scaffolding was not fully planked.
Recent events (2)
- · I (S) $1800
- · Z (S) $3978
1926.451 E01
- Issued
- Jan 14, 2020
- Abate by
- Feb 10, 2020
- Penalty
- Initial $3,978 · Current $1,800 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Cross braces were used as a means of access: (a) On or about November 25, 2019, employees were accessing welded tubular end frame scaffolding by using the end frames and were exposed to a fall hazard of approximately seven feet or more to the ground below.
Recent events (2)
- · I (S) $1800
- · Z (S) $3978
1926.451 G01 VII
- Issued
- Jan 14, 2020
- Abate by
- Feb 10, 2020
- Penalty
- Initial $3,978 · Current $1,800 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section: (a) On or about November 25, 2019, an employee was installing masonry onto the exterior of a house and was using extensions placed at the second tier of scaffolding as a working platform. The scaffolding did not have a railing system, net system, or personal fall protection system exposing the employee to a fall hazard of approximately thirteen (13) feet and six inches to the ground below.
Recent events (2)
- · I (S) $1800
- · Z (S) $3978
1926.451 H02 II
- Issued
- Jan 14, 2020
- Abate by
- Feb 10, 2020
- Penalty
- Initial $3,410 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(h)(2)(ii): A toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below: (a) On or about November 25, 2019, employees working while standing on the first tier of scaffolding directly under those working above them; were not protected from a struck-by hazard in that they were no toeboards installed onto the second level. (b) On or about November 25, 2019, employees working on the ground directly under those working above them; were not protected from a struck-by hazard in that they were no toeboards installed on both tiers of scaffolding.
Recent events (2)
- · I (S) $0
- · Z (S) $3410
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344475074.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.