Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: GRAHAM & KLAUSER CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GRAHAM & KLAUSER CONSTRUCTION in 1644 HIGHWAY 24, PALOMA, IL 62359 (NAICS 238130). OSHA activity number 344480561.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Graham & Klauser Construction for free Get an email when a new federal OSHA severe-injury report for Graham & Klauser Construction is published. One employer, no account, unsubscribe in one click.
Site address
1644 HIGHWAY 24
City
PALOMA
State
IL
ZIP
62359
Mailing
2365 NORTH 1200TH AVENUE, CAMP POINT, IL 62320
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1910.178 L02 II

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 23, 2020
Abate by
Feb 7, 2020
Penalty
Initial $2,313 · Current $1,500 Reduced
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace:     On or about November 26, 2019, prior to allowing employees to use the Gehl Telescopic Handler forklift, the employer did not ensure that each operator had completed formal instruction training, practical training and an evaluation.
Recent events (2)
  • · I (S) $1500
  • · Z (S) $2313

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 23, 2020
Abate by
Feb 7, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:    On or about, November 26, 2019, prior to allowing employees to use the Gehl Telescopic Handler forklift, the employer did not document the required certification for each operator which includes; the operators name, date of training, date of evaluation and/or the name of the person conducting the evaluation.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 23, 2020
Abate by
Feb 7, 2020
Penalty
Initial $4,048 · Current $2,600 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling:      On or about, November 26, 2019, employees were exposed to a fall hazard of up to 13 feet while using a platform attached to the forks of a Gehl Telescopic Handler forklift and the platform did not have a mid rail and top rail around all sides of the platform.
Recent events (2)
  • · I (S) $2600
  • · Z (S) $4048

1926.1053 B01

Other-than-serious 1 instance 1 exposed
Issued
Jan 23, 2020
Abate by
Feb 7, 2020
Penalty
Initial $2,892 · Current $0 Reduced
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and  the ladder side rails did not extend at least 3 feet (0.9 m) above the upper landing surface to which the ladder was used to gain access:      On or about November 26, 2019, an employee was exposed to a fall hazard of approximately 13 feet while using a ladder to gain access to a platform that was attached to the forks of a Gehl Telescopic Handler and the rails did not extend three feet above the platform.
Recent events (2)
  • · I (O) $0
  • · Z (S) $2892

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344480561.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.