MOUNT PROSPECT, IL —
OSHA Inspection: DOBEK PATYK DBA DOBEK CARPENTRY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DOBEK PATYK DBA DOBEK CARPENTRY in 918 S. ELM ST., MOUNT PROSPECT, IL 60056 (NAICS 238130). OSHA activity number 344484506.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DOBEK PATYK DBA DOBEK CARPENTRY
- Site address
- 918 S. ELM ST.
- City
- MOUNT PROSPECT
- State
- IL
- ZIP
- 60056
- Mailing
- 1605 N. CHESTNUT, ARLINGTON HEIGHTS, IL 60004
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 1
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Dec 27, 2019
- Abate by
- Jan 3, 2020
- Penalty
- Initial $2,558 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: a) On December 3, 2019, employees engaged in carpentry work exposed to struck-by hazards were not wearing hard hats
Recent events (2)
- — I (S) $1500
- — Z (S) $2558
1926.602 C01 II
- Issued
- Dec 27, 2019
- Abate by
- Jan 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were made without the manufacturer's written approval: a) On or about December 3, 2019, employees were using JCB 507-42 all terrain forklift to hoist and transport rough carpentry frame wall on the second floor by use of cargo strap slings.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.102 A01
- Issued
- Dec 27, 2019
- Abate by
- Jan 3, 2020
- Penalty
- Initial $2,558 · Current $1,822 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a) On or about December 3, 2019, employees were using pneumatic nail guns without protective eye equipment while performing carpentry work.
Recent events (2)
- — I (S) $1822
- — Z (S) $2558
1926.501 B13
- Issued
- Dec 27, 2019
- Abate by
- Jan 3, 2020
- Penalty
- Initial $3,580 · Current $1,920 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: a) On December 3, 2019, employees were exposed to fall hazards of approximately 10.8 feet from the second floor deck while performing framing carpentry work. b) On December 3, 2019, employees were exposed to fall hazards of approximately 8.5 feet from unguarded floor openings leading to the basement.
Recent events (2)
- — I (S) $1920
- — Z (S) $3580
1926.1052 C01 II
- Issued
- Dec 27, 2019
- Abate by
- Jan 3, 2020
- Penalty
- Initial $2,558 · Current $1,508 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with one stair rail system along each unprotected side or edge: a) On December 3, 2019, employees were using a stairway to access the second floor from the first floor. The stairway that was not equipped with a stair rail system on either unprotected side.
Recent events (2)
- — I (S) $1508
- — Z (S) $2558
More inspections at Dobek Patyk DBA Dobek Carpentry
View Dobek Patyk DBA Dobek Carpentry's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344484506.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.