SYRACUSE, NY —
OSHA Inspection: TONY ROTELLA'S BODY SHOP INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of TONY ROTELLA'S BODY SHOP INC. in 450 HORAN ROAD, SYRACUSE, NY 13209 (NAICS 811121). OSHA activity number 344489034.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TONY ROTELLA'S BODY SHOP INC.
- Site address
- 450 HORAN ROAD
- City
- SYRACUSE
- State
- NY
- ZIP
- 13209
- Mailing
- 450 HORAN ROAD, SYRACUSE, NY 13209
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 22
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.107 G02
- Issued
- Mar 6, 2020
- Abate by
- Mar 26, 2020
- Penalty
- Initial $2,313 · Current $1,388 Reduced
General-duty citation text
29 CFR 1910.107(g)(2): Spraying area(s) were not kept free from the accumulation of deposits of combustible residues: a) Wash Bay Area, on or about 12/5/19: There was an accumulation of combustible residues on spraying racks and employees spray with a clear coat which is solvent based.
Recent events (2)
- — I (S) $1387.8
- — Z (S) $2313
1910.215 A04
- Issued
- Mar 6, 2020
- Penalty
- Initial $1,966 · Current $1,180 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Mechanical Shop, on or about 12/5/19: A Jet 8" Bench Grinder had an opening between the work rest and grinding wheel that measured 1/4-inch at the left wheel.
Recent events (2)
- — I (S) $1179.6
- — Z (S) $1966
1910.215 B09
- Issued
- Mar 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Mechanical Shop, on or about 12/5/19: A Jet 8" Bench Grinder had an had an opening between the tongue guard and grinding wheel that measured 1-inch at the left wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 E01
- Issued
- Mar 6, 2020
- Abate by
- Mar 26, 2020
- Penalty
- Initial $4,626 · Current $2,776 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Paint Shop, on or about 12/5/19: Employee wears a 3M full face air purifying respirator and had not been provided with a medical evaluation. Tony Rotella's Body Shop Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.134(e)(1), which was contained in OSHA inspection number 1117441, citation number 1, item number 1a and was affirmed as a final order on 3/30/16, with respect to a workplace located at 450 Horan Road, Syracuse, NY 13209.
Recent events (2)
- — I (R) $2775.6
- — Z (R) $4626
1910.134 F02
- Issued
- Mar 6, 2020
- Abate by
- Mar 26, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employer did not ensure that an employee using a tight fitting facepiece respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) was used, and at least annually thereafter: a) Paint Shop, on or about 12/5/19: Employee required to wear a 3M fuil face air purifying respirator and had not been fit tested Tony Rotella's Body Shop Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.134(f)(2), which was contained in OSHA inspection number 1117441, citation number 1, item number 1b and was affirmed as a final order on 3/30/16 , with respect to a workplace located at 450 Horan Road, Syracuse, NY 13209.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.304 F01 IV
- Issued
- Mar 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less were not readily accessible to each employee or authorized building management personnel: a) Wash Bay Area, on or about 12/5/19: Access to a breaker panel box was blocked by spraying racks and a welder.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Tony Rotella'S Body Shop INC.
View Tony Rotella'S Body Shop INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344489034.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.