Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PARTS PRO AUTOMOTIVE WAREHOUSE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PARTS PRO AUTOMOTIVE WAREHOUSE in 4597 VAN EPPS ROAD UNIT 500, BROOKLYN HEIGHTS, OH 44131 (NAICS 423120). OSHA activity number 344499439.

Watch Parts PRO Automotive Warehouse — free Get an email when a new federal OSHA severe-injury report for Parts PRO Automotive Warehouse is published. One employer, no account, unsubscribe in one click.
Site address
4597 VAN EPPS ROAD UNIT 500
City
BROOKLYN HEIGHTS
State
OH
ZIP
44131
Mailing
4597 VAN EPPS ROAD UNIT 500, BROOKLYN HEIGHTS, OH 44131
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423120
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.28 B01 I

Serious Gravity 10 1 instance 4 exposed
Issued
Penalty
Initial $9446.00 · Current $9446.00
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following:  Guardrail systems, safety net systems, or personal fall arrest systems:     On or about December 10, 2019, at a warehouse facility located at 4597 Van Epps Rd, Brooklyn Heights, Ohio 44131; the employer did not ensure that employees utilizing black plastic totes (Black Plastic Tote 3.9 feet wide, 3.2 feet long, 2.8 feet tall with fold down sides for accessing material placed inside the tote) as elevated working surfaces with unprotected sides and edges were protected from falls greater than 4 feet above the ground.
Recent events (2)
  • — I (S) $9446
  • — Z (S) $9446

1910.178 A04

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $9446.00 · Current $0.00 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:     On or about December 10, 2019, at the employers work location 4597 Van Epps Rd, Brooklyn Heights, Ohio 44131; the employer did not ensure the employees that operate/drive 2 fork trucks (Blue Nissan 50 SSN F116673 and Yellow Yale SSN F18427) which pick up and utilize black plastic totes as an elevated working surface did not get the manufacturers prior written approval.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9446

1910.37 A03

Serious Gravity 1 1 instance 6 exposed
Issued
Penalty
Initial $4048.00 · Current $2024.00 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:   On or about December 10, 2019, at the employers work location 4597 Van Epps Rd, Brooklyn Heights, Ohio 44131; the employer did not ensure that exit routs were unobstructed.  Material was stored in front of the Room 1A Strut Storage Area emergency exit.
Recent events (2)
  • — I (S) $2024
  • — Z (S) $4048

1910.178 L01 II

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $8096.00 · Current $4858.00 Reduced
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).       On or about December 10, 2019, the employer did not ensure the operators of 2 fork trucks (Blue Nissan 50 SSN F116673 and Yellow Yale SSN F18427) were properly trained and successfully completed training requirements prior to continuous operation.
Recent events (2)
  • — I (S) $4858
  • — Z (S) $8096

1910.303 G01 I B

Other-than-serious 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $0.00 Reduced
29 CFR 1910.303(g)(1)(i)(B): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater:     On or about December 10, 2019, the employer did not ensure the working space directly in front of electrical cabinets were free of obstruction and stored material.
Recent events (2)
  • — I (O) $0
  • — Z (S) $4048

View PARTS PRO AUTOMOTIVE WAREHOUSE's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344499439.