THEODORE, AL ·
OSHA Inspection: COASTAL FRAME & ALIGNMENT, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COASTAL FRAME & ALIGNMENT, INC. in 5182 WILLIS RD, THEODORE, AL 36582 (NAICS 811118). OSHA activity number 344502026.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COASTAL FRAME & ALIGNMENT, INC.
- Site address
- 5182 WILLIS RD
- City
- THEODORE
- State
- AL
- ZIP
- 36582
- Mailing
- 5182 WILLIS RD, THEODORE, AL 36582
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811118
- Employees
- 6
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.28 B08 II
- Issued
- Feb 3, 2020
- Abate by
- Feb 13, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(8)(ii): Floor markings at least 6 feet (1.8 m) from the edge of the pit were not in colors that contrast with the surrounding area and a warning line at least 6 feet (1.8 m) from the edge of the pit as well as stanchions were not in place: a) Frame Machine Service Pit: On December 11, 2019, and at times prior, the employer failed to apply floor markings and stanchions to mark the edge of the frame machine service pit. b) Front End Alignment Service Pit: On December 11, 2019, and at times prior, the employer failed to apply floor markings and stanchions to mark the edge of the front end alignment service pit.
Recent events (1)
- · Z (S) $0
1910.28 B08 III
- Issued
- Feb 3, 2020
- Abate by
- Feb 13, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(8)(iii): 29 CFR 1910.28(b)(8)(iii): For a repair pit, service pit, or assembly pit that was less than 10 feet (3 m) deep, the employer did not post readily visible caution signs that meet the requirements of �1910.145 and state "Caution-Open Pit." a) Frame Machine Service Pit: On December 11, 2019, and at times prior, the employer failed to post visible caution signs stating "Caution-Open Pit". b) Front End Alignment Service Pit: On December 11, 2019, and at times prior,the employer failed to post visible caution signs stating "Caution-Open Pit".
Recent events (1)
- · Z (S) $0
1910.30 A03 I
- Issued
- Feb 3, 2020
- Abate by
- Feb 13, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.30(a)(3)(i): The employer did not ensure that employees were trained in the nature of the fall hazards in the work area and how to recognize them. a) Frame Machine Service Pit: On December 11, 2019, and at times prior, the employer failed to ensure that employees were trained to recognize the hazards of working around open pits.
Recent events (1)
- · Z (S) $0
1910.243 C01
- Issued
- Feb 3, 2020
- Abate by
- Feb 13, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4). a) Dewalt 4" hand held grinder, service area: On December 11, 2019, and at times prior, the employer exposed employees to struck-by hazards in that employees were allowed to use a 4" Dewalt portable grinder with the guard removed. b) Dewalt 6" hand held grinder, service area: On December 11, 2019, and at times prior, the employer exposed employees to struck-by hazards in that employees were allowed to use a 6" Dewalt portable grinder with the guard removed.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 811118)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344502026.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.