CAMDEN, NJ —
OSHA Inspection: COMARCO PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of COMARCO PRODUCTS, INC. in 501 JACKSON STREET, CAMDEN, NJ 08104 (NAICS 722110). OSHA activity number 344510896.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMARCO PRODUCTS, INC.
- Site address
- 501 JACKSON STREET
- City
- CAMDEN
- State
- NJ
- ZIP
- 08104
- Mailing
- 7100 PRC WAY, PALATKA, FL 32177
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 722110
- Employees
- 65
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 21, 2020
- Penalty
- Initial $9,446 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by ingoing nip points and rotating parts: a) COMARCO PRODUCTS, INC. - Slicer area: Guards were not provided near the slicer area where a gap between conveyor tables created a pinch point, observed on or about 12/04/2019. b) COMARCO PRODUCTS, INC. - Breading Area: Guards were not provided for a spindle, observed on or about 12/04/2019. c) COMARCO PRODUCTS, INC. - Fryer Area: Guards were not placed on the stove flames of the production line, observed on or about 12/04/2019. d) COMARCO PRODUCTS, INC.- Turning table after breading Area: A pinch point was created by missing roll parts the end of the Rex-Turn Conveyor belt Model #816-34R90-068, S/N 816-34-0038 and damaged mesh which caused an amputation, occurred on or about 12/02/2019.
Recent events (3)
- — J (S) $5000
- — C (S) $9446
- — Z (S) $9446
1910.219 D01
- Issued
- Apr 21, 2020
- Penalty
- Initial $6,747 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) COMARCO PRODUCTS, INC. - Slicer area: Guards were not provided near the slicer area where there is an uncover belt and pulley, observed on or about 12/04/2019. b) COMARCO PRODUCTS, INC. - Breading Area: Guards were not provided two belts and pulleys observed near the breading area of the production line, observed on or about 12/04/2019.
Recent events (3)
- — J (S) $2500
- — C (S) $6747
- — Z (S) $6747
1910.219 E01 I
- Issued
- Apr 21, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) COMARCO PRODUCTS, INC. - Slicer area: Guards were not provided near the slicer area where there is an uncover belt and pulley, observed on or about 12/04/2019. b) COMARCO PRODUCTS, INC. - Breading Area: Guards were not provided two belts and pulleys observed near the breading area of the production line, observed on or about 12/04/2019.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1904.39 A02
- Issued
- Apr 21, 2020
- Penalty
- Initial $6,747 · Current $2,500 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) 501 Jackson Street, Camden NJ 08104: The employer did not report the amputation of an employee as a result of work related incident on December 2, 2019 within 24-hours of the incident.
Recent events (3)
- — J (O) $2500
- — C (O) $6747
- — Z (O) $6747
More inspections at Comarco Products, INC.
View Comarco Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 722110)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344510896.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.