OSHA Inspection: EDISON PROPERTIES, LLC

Issued

2020-06-16 00:00:00

Abate by

2020-07-06 00:00:00

Penalty

Initial $13494.00 · Current $11502.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  Location: 409 East 110th Street, New York, NY 10029  On or about: December 21, 2019  (a) The employer did not establish a program consisting of specific energy control procedures, employee training, and periodic inspections. Employees were exposed to uncontrolled energy sources while performing maintenance on park lifts.

Issued

2020-06-16 00:00:00

Abate by

2020-07-06 00:00:00

Penalty

Initial $13494.00 · Current $13494.00

General-duty citation text

29 CFR 1910.147(c)(2)(ii): The employer's tagout energy control program procedures did not successfully comply with 29 CFR 1910.147(c)(3) and no lockout was provided for employee protection:  Location: 409 East 110th Street, New York, NY 10029  On or about: December 21, 2019  (a) The employer did not ensure that tagout energy control procedures provided full employee protection; no lockout were provided for employees performing parking lift maintenance.

Issued

2020-06-16 00:00:00

Abate by

2020-07-06 00:00:00

Penalty

Initial $13494.00 · Current $11502.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  Location: 409 East 110th Street, New York, NY 10029  On or about: December 21, 2019  (a) The employer did not document nor utilize energy control procedures for employees engaged in maintenance parking lifts. Employees were exposed to uncontrolled energy sources while performing maintenance on park lifts.

Issued

2020-06-16 00:00:00

Abate by

2020-07-06 00:00:00

Penalty

Initial $13494.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing, or blocking of machines or equipment from energy sources:  Location: 409 East 110th Street, New York, NY 10029  On or about: December 21, 2019  (a) The employer did not provide employees with locks, tags, or other hardware for isolating electrical energy sources when performing maintenance on parking lifts.

Issued

2020-06-16 00:00:00

Abate by

2020-07-06 00:00:00

Penalty

Initial $13494.00 · Current $11502.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees.  Location: 409 East 110th Street, New York, NY 10029  On or about: December 21, 2019  (a) The employer did not ensure employees acquired the knowledge and skills required for the safe application, usage, and removal of the energy controls. Employees were exposed to uncontrolled energy sources while performing maintenance on park lifts.