Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: AVALOS FRAMING, LLC

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of AVALOS FRAMING, LLC in 3064 WILLIAMSTOWN LANE, MASON, OH 45040 (NAICS 238130). OSHA activity number 344542600.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Avalos Framing, LLC for free Get an email when a new federal OSHA severe-injury report for Avalos Framing, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
AVALOS FRAMING, LLC
Site address
3064 WILLIAMSTOWN LANE
City
MASON
State
OH
ZIP
45040
Mailing
2480 MERRIWAY LANE, CINCINNATI, OH 45231
Inspection type
Programmed Related (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
Private (A)

4 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 5 exposed
Issued
Feb 13, 2020
Abate by
Mar 2, 2020
Penalty
Initial $4,048 · Current $1,861 Reduced
29 CFR 1926.20(b)(2): Accident prevention responsibilities. Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.      a) On or about 01/07/2020 there was no frequent and regular inspection program being maintained in use by a competent person to ensure the job site, material and equipment; such as fall protection systems was being utilized.
Recent events (2)
  • · I (S) $1861
  • · Z (S) $4048

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 13, 2020
Abate by
Mar 2, 2020
Penalty
Initial $4,048 · Current $0 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.    a) On or about 01/07/2020 an employee was installing Tyvek House-wrap at a new residential property, was exposed to fall hazards of 14.7 ft. while working to top of lower level roof.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4048

1926.503 A01

Deleted Serious Gravity 10 1 instance 5 exposed
Issued
Feb 13, 2020
Abate by
Mar 2, 2020
Penalty
Initial $4,048 · Current $0 Reduced
29 CFR 1926.503(a)(1): The following training provisions supplement and clarify the requirements of 1926.21 regarding the hazards addressed in Subpart M of this part. Training program. The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.   a) On or about 01/07/2020 employees have not been trained on fall protection systems and on hazards of falls, while working at heights of 14.7 ft. from the ground.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4048

1926.1053 B04

Other-than-serious 1 instance 1 exposed
Issued
Feb 13, 2020
Penalty
Initial $325 · Current $325
29 CFR 1926.1053(b)(4): Use. The following requirements apply to all ladders as indicated, including job-made ladders. Ladders shall be used only for the purpose for which they were designed.   a) On or about 01/07/2020,  an employee was working on an A-frame ladder set on an uneven surface. The ladders was closed, folded and leaning against the new residential property, not being utilized for the purpose for which it was designed.
Recent events (2)
  • · I (O) $325
  • · Z (O) $325

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344542600.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.