OSHA Inspection: G.Z. CONSTRUCTION

Issued

Mar 4, 2020

Abate by

Mar 19, 2020

Penalty

Initial $4,048 · Current $3,000 Reduced

General-duty citation text

29 CFR 1926.20(b)(2): Accident prevention responsibilities. Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.    a) On or about 01/08/2020 there was no frequent and regular inspection program being maintained in use by a competent person to ensure the job site, material and equipment; such as fall protection systems; and proper use of ladders.

Issued

Mar 4, 2020

Penalty

Initial $4,048 · Current $0 Reduced

General-duty citation text

29 CFR 1926.1053(b)(4): Use. The following requirements apply to all ladders as indicated, including job-made ladders. Ladders shall be used only for the purpose for which they were designed.    a) On or about 01/08/2020, employees were utilizing a Werner 6 ft. switchback ladder trying to reach the new roof of property, which was measured at 14.7 ft. from the ground.

Issued

Mar 4, 2020

Penalty

Initial $4,048 · Current $3,000 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.    a) On or about 01/08/2020 employees framing a new residential structure were exposed to fall hazards of 22.5 ft. from the ground, while framing the new roof.

Issued

Mar 4, 2020

Abate by

Mar 19, 2020

Penalty

Initial $4,048 · Current $0 Reduced

General-duty citation text

29 CFR 1926.503(a)(1): The following training provisions supplement and clarify the requirements of 1926.21 regarding the hazards addressed in Subpart M of this part. Training program. The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.    a) On or about 01/08/2020 employees have not been trained on fall protection systems and on hazards of falls, while working at heights of 22.5 ft.