ARANSAS PASS, TX —
OSHA Inspection: AARON CONCRETE CONTRACTORS, L.P.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of AARON CONCRETE CONTRACTORS, L.P. in 3274 HWY 35 BYPASS, ARANSAS PASS, TX 78336 (NAICS 327999). OSHA activity number 344557848.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AARON CONCRETE CONTRACTORS, L.P.
- Site address
- 3274 HWY 35 BYPASS
- City
- ARANSAS PASS
- State
- TX
- ZIP
- 78336
- Mailing
- 4108 NIXON LANE, AUSTIN, TX 78725
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327999
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Jun 2, 2020
- Abate by
- Jun 16, 2020
- Penalty
- Initial $12,145 · Current $7,287 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: On January 14, 2020, and times prior thereto, at the Pick & Station Area, the employer did not establish or implement a respiratory protection program when employee(s) were required to wear a tight-fitting respirator during concrete crushing operations.
Recent events (2)
- — I (S) $7287
- — Z (S) $12145
1910.147 C04 I
- Issued
- Jun 2, 2020
- Abate by
- Jun 16, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On January 14, 2020, and times prior thereto, Pick & Station Area, the employer did not enforce the use of control procedures to control hazardous energies during repairing of the Lattice Radial Conveyor by employees.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 I
- Issued
- Jun 2, 2020
- Abate by
- Jun 16, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: On January 14, 2020, and times prior thereto, Pick & Station Area, the employer did not conduct annual, periodic inspections of the energy control procedure for the Lattice Radial Conveyor.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 I
- Issued
- Jun 2, 2020
- Abate by
- Jun 16, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: On January 14, 2020, and times prior thereto, Pick & Station Area, the employer did not provide adequate training to ensure the energy control program was understood by employees.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G02 I B
- Issued
- Jun 2, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i)(B): Except as elsewhere required or permitted by this standard, live parts of electrical equipment operating at 50 volts or more was not guarded by suitable permanent, substantial partitions or screens so arranged so that only qualified persons would have access to the space within reach of the live parts. Any openings in such partitions or screens were not so sized and located that persons were not likely to come into accidental contact with the live parts or to bring conducting objects into contact with them: On January 14, 2020, Pick & Station Area, the employer did not ensure live parts of electrical equipment would come into accidental contact with employees.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Aaron Concrete Contractors, L.P.
View Aaron Concrete Contractors, L.P.'s full OSHA safety record →
More inspections in this industry (NAICS 327999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344557848.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.