Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,195,903Inspections Most recent open 2026-08-18 Last loaded 2026-08-21

OSHA Inspection: BALL METAL BEVERAGE CONTAINER CORP.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BALL METAL BEVERAGE CONTAINER CORP. in 11 ADAMS ROAD, SARATOGA SPRINGS, NY 12866 (NAICS 332431). OSHA activity number 344558317.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ball Metal Beverage Container Corp. for free Get an email when a new federal OSHA severe-injury report for Ball Metal Beverage Container Corp. is published. One employer, no account, unsubscribe in one click.
Site address
11 ADAMS ROAD
City
SARATOGA SPRINGS
State
NY
ZIP
12866
Mailing
11 ADAMS ROAD, SARATOGA SPRINGS, NY 12866
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332431
Employees
8605
Ownership type
Private (A)

7 citations on file for this inspection.

1910.23 B12

Other-than-serious Gravity 10 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
Dec 9, 2021
Penalty
Initial $13,494 · Current $10,000 Reduced
29 CFR 1910.23(b)(12): Each employee did not use at least one hand to grasp the ladder when climbing up and down it:  a) Line 1 Trench Conveyor Area in the Front End - On or about January 7, 2020, an employee did not have at least one hand grasping the ladder when climbing down it into the trench.
Recent events (3)
  • · F (O) $10000
  • · C (S) $13494
  • · Z (S) $13494

1910.23 D04

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
Apr 23, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.23(d)(4): The side rails of through or sidestep ladders did not extend 42 inches (1.1 m) above the top of the access level or landing platform served by the ladder:  a) Line 1 Trench Conveyor Area in the Front End -  On or about January 7, 2020, a fixed industrial ladder (South Ladder) located on the south side of the trench did not have side rails that extend 42 inches above the top of the access level or landing platform (the floor). Side rails of the South Ladder were just below floor level at approximately 49 inches high from the ground of the trench.  The floor measured to be approximately 52 inches high from the ground of the trench.
Recent events (3)
  • · F (S) $0
  • · C (S) $0
  • · Z (S) $0

1910.28 B01 I

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Apr 17, 2020
Abate by
Dec 9, 2021
Penalty
Initial $9,639 · Current $8,000 Reduced
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following:  Guardrail systems, safety net systems, or personal fall arrest systems:  a) Line 1 Trench Conveyor Area in the Front End - On or about January 7, 2020, the employer did not ensure employees were protected from falls when pulling up and removing floor grates, and working around an open trench that was approximately 4 feet 4 inches in depth.
Recent events (3)
  • · F (O) $8000
  • · C (S) $9639
  • · Z (S) $9639

1910.147 C04 I

Serious Gravity 10 2 instances 2 exposed
Issued
Apr 17, 2020
Abate by
Dec 9, 2021
Penalty
Initial $13,494 · Current $10,000 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) Line 1 Can Conveying Wet Elevator Area in the Front End- On or about January 7, 2020, procedures were not utilized for the Line 1 Can Conveying Wet Elevator to clear a jam.  b) Line 1 South Trench Conveyor in the Front End - On or about January 7, 2020, procedures were not utilized for the Line 1 South Trench Conveyor when an employee needed to access the Line 1 Trench to replace a belt on the Line 1 North Trench Conveyor that is located approximately 12 inches directly next to the Line 1 South Trench Conveyor.
Recent events (3)
  • · F (S) $10000
  • · C (S) $13494
  • · Z (S) $13494

1910.147 F03 I

Deleted Serious Gravity 10 2 instances 1 exposed
Issued
Apr 17, 2020
Abate by
Apr 23, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft, department or other group:  a)  Line 1 North Trench Conveyor in the Front End - On or about January 7, 2020,  Group LOTO procedures were not utilized for the Line 1 North Trench Conveyor when an employee needed to access the Line 1 Trench to replace a belt on the Line 1 North Trench Conveyor that is located approximately 12 inches directly next to the Line 1 South Trench Conveyor.  b) Line 1 South Trench Conveyor in the Front End - On or about January 7, 2020, Group LOTO procedures were not utilized for the Line 1 South Trench Conveyor when an employee needed to access the Line 1 Trench to replace a belt on the Line 1 North Trench Conveyor that is located approximately 12 inches directly next to the Line 1 South Trench Conveyor.
Recent events (3)
  • · F (S) $0
  • · C (S) $0
  • · Z (S) $0

1910.219 F03

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
Apr 23, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  a) Front End Trench - On or about January 7, 2020, sprocket wheels and chains were not guarded for the main drive for the Line 1 South Trench Conveyor when an employee needed to access the Line 1 Trench to replace a belt on the Line 1 North Trench Conveyor that is located approximately 12 inches directly next to the Line 1 South Trench Conveyor.
Recent events (3)
  • · F (S) $0
  • · C (S) $0
  • · Z (S) $0

1910.147 C06 I

Serious Gravity 10 2 instances 2 exposed
Issued
Apr 17, 2020
Abate by
Dec 9, 2021
Penalty
Initial $26,988 · Current $17,300 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) Line 1 Trench Conveyors (North and South Conveyors) in the Front End - On or prior to January 7, 2020, the employer did not conduct a periodic inspection of the energy control procedure for the Line 1 Trench Conveyors (North and South Conveyors).  b) Line 1 Can Conveying Wet Elevator Area in the Front End- On or prior to about January 7, 2020, the employer did not conduct a periodic inspection of the energy control procedure for the Line 1 Can Conveying Wet Elevator.   Ball Metal Beverage Container Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1296296, citation number 1, item number 1, and was affirmed as a final order on 04/19/18 with respect to a workplace located at 124 Carson Road, Birmingham, AL 35215.
Recent events (3)
  • · F (S) $17300
  • · C (R) $26988
  • · Z (R) $26988

View Ball Metal Beverage Container Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344558317.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.