ALLEN, TX ·
OSHA Inspection: V & M FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of V & M FRAMING, LLC in 820 KENNEDY DRIVE, ALLEN, TX 75013 (NAICS 238130). OSHA activity number 344558721.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- V & M FRAMING, LLC
- Site address
- 820 KENNEDY DRIVE
- City
- ALLEN
- State
- TX
- ZIP
- 75013
- Mailing
- 2205 LE MANS, CARROLLTON, TX 75006
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Jan 23, 2020
- Abate by
- Feb 19, 2020
- Penalty
- Initial $2,892 · Current $1,735 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) On or about January 14, 2020, at the single family residential home, where employees were exposed to struck-by hazards while working in areas where overhead hazards existed and were not wearing head protection.
Recent events (2)
- · I (S) $1735
- · Z (S) $2892
1926.102 A01
- Issued
- Jan 23, 2020
- Abate by
- Feb 19, 2020
- Penalty
- Initial $2,892 · Current $0 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) On or about January 14, 2020, at the new single family residential construction site, where employees were exposed to struck-by hazards while using pneumatic nail guns and circular saws to cut wood framing without the use of eye protection.
Recent events (2)
- · I (S) $0
- · Z (S) $2892
1926.501 B13
- Issued
- Jan 23, 2020
- Abate by
- Feb 19, 2020
- Penalty
- Initial $4,048 · Current $2,024 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer did not develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502: a) On or about January 14, 2020, at the single-family residential construction site, employees were exposed to fall hazards of more than 6-feet above the ground level below while performing framing work without the use of a guardrail system or personal fall arrest system.
Recent events (2)
- · I (S) $2024
- · Z (S) $4048
1926.1051 A
- Issued
- Jan 23, 2020
- Abate by
- Feb 19, 2020
- Penalty
- Initial $4,048 · Current $2,428 Reduced
General-duty citation text
29 CFR 1926.1051(a): A stairway or ladder was not provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided: a) At the multi-family residential construction site, where employees were exposed to fall hazards while using the stud framed walls as access/egress to the upper landings.
Recent events (2)
- · I (S) $2428
- · Z (S) $4048
1926.1053 B13
- Issued
- Jan 23, 2020
- Abate by
- Feb 19, 2020
- Penalty
- Initial $4,048 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was being used as a step: a) On or about January 14, 2020, where employees were exposed to fall hazards while using the top step of a step ladder to access the upper landing.
Recent events (2)
- · I (S) $0
- · Z (S) $4048
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344558721.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.