Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FRED HARROLD DBA PALLET WORLD, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FRED HARROLD DBA PALLET WORLD, LLC in 1226 BISSEL, VENICE, IL 62090 (NAICS 321920). OSHA activity number 344561949.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fred Harrold DBA Pallet World, LLC — free Get an email when a new federal OSHA severe-injury report for Fred Harrold DBA Pallet World, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1226 BISSEL
City
VENICE
State
IL
ZIP
62090
Mailing
1226 BISSEL ST, VENICE, IL 62090
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
Employees
11
Ownership type
A

5 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 7 exposed
Issued
Apr 17, 2020
Penalty
Initial $4,627 · Current $1,619 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition:  On or about January 16, 2020, throughout the Pallet Shop, employees were exposed to walking-working surfaces that were not kept in a clean, orderly, and sanitary condition due to the disorderly placement of pallets, wood scrap, and piles of saw dust.
Recent events (3)
  • — F (S) $1619
  • — C (S) $4627
  • — Z (S) $4627

1910.147 C01

Serious Gravity 10 2 instances 3 exposed
Issued
Apr 17, 2020
Abate by
Nov 13, 2020
Penalty
Initial $5,397 · Current $1,619 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:   a. On or about December 16, 2019, and at times prior to, employees performed maintenance on machinery to include the Pallet Dawg machine.  The employer had not established a program consisting of energy control procedures, employee training and inspections to ensure the startup or release of stored energy could not occur while servicing or maintenance.    b. On or about January 16, 2020, and at times prior to, employees performed maintenance on machinery to include the Horizontal Band Saw machine. The employer had not established a program consisting of energy control procedures, employee training and inspections to ensure the startup or release of stored energy could not occur while servicing or maintenance.
Recent events (3)
  • — F (S) $1619
  • — C (S) $5397
  • — Z (S) $5397

1910.176 B

Serious Gravity 10 1 instance 7 exposed
Issued
Apr 17, 2020
Abate by
Nov 13, 2020
Penalty
Initial $5,397 · Current $1,619 Reduced
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:  On or about January 16, 2020, and at times prior, the employer did not ensure that all stored materials were stacked and blocked so that materials were stabled and secured against sliding and collapse to prevent employee injury.  Throughout the facility employees were exposed to struck by hazards while working near wooden pallets stored in tiers without any means to secure the material against sliding and collapse.
Recent events (3)
  • — F (S) $1619
  • — C (S) $5397
  • — Z (S) $5397

1910.178 L01 I

Serious Gravity 10 1 instance 7 exposed
Issued
Apr 17, 2020
Penalty
Initial $5,397 · Current $1,620 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  On or about January 16, 2020 and at times prior. The employer did not ensure that each powered industrial truck operator was competent to operate the Hyster powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation.
Recent events (3)
  • — F (S) $1620
  • — C (S) $5397
  • — Z (S) $5397

1910.178 Q07

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
Nov 13, 2020
Penalty
Initial $5,397 · Current $1,620 Reduced
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:     On or about January 16, 2020, the employer did not ensure that the Industrial trucks were examined before being placed in service.  The propane fuel tank was not properly secured to the Hyundai forklift, (Model 30L-7A; Serial # HHIHHF09J130000148) .
Recent events (3)
  • — F (S) $1620
  • — C (S) $5397
  • — Z (S) $5397

View Fred Harrold DBA Pallet World, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344561949.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.