ROME, NY ·
OSHA Inspection: BROSH MECHANICAL INC.
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of BROSH MECHANICAL INC. in 650 HANGAR ROAD, ROME, NY 13441 (NAICS 238220). OSHA activity number 344571898.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BROSH MECHANICAL INC.
- Site address
- 650 HANGAR ROAD
- City
- ROME
- State
- NY
- ZIP
- 13441
- Mailing
- 7702 MALTLAGE, LIVERPOOL, NY 13090
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.1153 E02
- Issued
- May 8, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $2,892 · Current $2,169 Reduced
S103
General-duty citation text
29 CFR 1926.1153(e)(2): Where respirator use is required by this section, the employer did not institute a respiratory protection program in accordance with 29 CFR 1910.134: a) 650 Hangar Road, Griffis AFB, Rome, NY, on or about 1/22/20: An effective written respiratory protection program was neither developed nor implemented for employees jackhammering concrete indoors during the installation of piping systems. Abatement certification must be submitted for this item
Recent events (2)
- · I (S) $2169
- · Z (S) $2892
1910.134 E01
- Issued
- May 8, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $0 · Current $0
S103
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) 650 Hangar Road, Griffis AFB, Rome, NY, on or about 1/22/20: Employees performing table 1 operations by jackhammering concrete and sawing concrete indoors during the installation of piping systems and provided with either N95s or half face air purifying respirators, were not medically evaluated for respirator use. Abatement certification must be submitted for this item
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.134 F02
- Issued
- May 8, 2020
- Abate by
- Jun 12, 2020
- Penalty
- Initial $0 · Current $0
S103
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: a) 650 Hangar Road, Griffis AFB, Rome, NY, on or about 1/22/20: Employees performing table 1 operations by jackhammering concrete and sawing concrete indoors during the installation of piping systems and provided with either N95s or half face air purifying respirators, were not fit-tested on the respirators that they use. Abatement certification must be submitted for this item
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1153 G01
- Issued
- May 8, 2020
- Abate by
- May 28, 2020
- Penalty
- Initial $2,892 · Current $2,169 Reduced
S103
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a) 650 Hangar Rd., Griffis AFB, on or about 1/22/20: An exposure control plan was not developed for employees engaged in indoor operations that create silica dust such as concrete saw operations and jackhammering. Abatement certification must be submitted for this item.
Recent events (2)
- · I (S) $2169
- · Z (S) $2892
1926.1153 I02 I
- Issued
- May 8, 2020
- Abate by
- May 28, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(i)(2)(i): The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of at least the information contained in paragraphs (i)(2)(i)(A)-(i)(2)(i)(F) of this standard: a) 650 Hangar Rd., Griffis AFB, on or about 1/22/20: Employees engaged in indoor operations that create silica dust such as concrete saw operations and jackhammering concrete were not provided with training on silica as required by this standard. Abatement certification must be submitted for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 E01
- Issued
- May 8, 2020
- Abate by
- May 18, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) 650 Hangar Rd., Griffis AFB, on or about 1/22/20: A hazard communication program was not written for employees that use gasoline for powered saws. Abatement certification must be submitted for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Brosh Mechanical INC.
View Brosh Mechanical INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344571898.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.