HURLEY, WI —
OSHA Inspection: SNOWBELT HARDWOODS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SNOWBELT HARDWOODS, INC. in 345 RINGLE DR, HURLEY, WI 54534 (NAICS 321999). OSHA activity number 344582135.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SNOWBELT HARDWOODS, INC.
- Site address
- 345 RINGLE DR
- City
- HURLEY
- State
- WI
- ZIP
- 54534
- Mailing
- 345 RINGLE DR, HURLEY, WI 54534
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Apr 27, 2020
- Abate by
- Jul 31, 2020
- Penalty
- Initial $5,398 · Current $3,239 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: (a) South side roof top; Employee(s) engaged in snow removal from a facility roof top greater than 6 feet above ground level were not utilizing adequate fall protection.
Recent events (2)
- — I (S) $3239
- — Z (S) $5398
1910.178 A04
- Issued
- Apr 27, 2020
- Abate by
- May 11, 2020
- Penalty
- Initial $5,398 · Current $3,239 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) Kiln drying area; The employer did not obtain written manufacturer approval for the use of the front end attachment.
Recent events (2)
- — I (S) $3239
- — Z (S) $5398
1910.178 A05
- Issued
- Apr 27, 2020
- Abate by
- May 11, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: (a) Kiln drying area; The Toyota forklift was not marked to identify the combined weight of the truck and the front end attachment at maximum elevation, with it's load centered.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Apr 27, 2020
- Abate by
- May 11, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Production floor; The Toyota forklift was not examined for defects before being placed in service.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Snowbelt Hardwoods, INC.
View Snowbelt Hardwoods, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344582135.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.