WESTFIELD, NY —
OSHA Inspection: CREATIVE STONE MFG INC. DBA CORONADO STONE PRODUCTS
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CREATIVE STONE MFG INC. DBA CORONADO STONE PRODUCTS in 59 FRANKLIN STREET, WESTFIELD, NY 14787 (NAICS 444190). OSHA activity number 344592845.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE STONE MFG INC. DBA CORONADO STONE PRODUCTS
- Site address
- 59 FRANKLIN STREET
- City
- WESTFIELD
- State
- NY
- ZIP
- 14787
- Mailing
- 59 FRANKLIN STREET, WESTFIELD, NY 14787
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 444190
- Employees
- 26
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A04
- Issued
- May 1, 2020
- Abate by
- May 22, 2020
- Penalty
- Initial $6,554 · Current $10,651
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Samples Department - On or about 1/29/20, employees use a DeWalt DW758 8 inch bench grinder, operating at 3600 rpm, to grind stone surfaces. The work rest was adjusted on the left grinding wheel with an opening of 3/8 inch. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $10651
- — Z (S) $6554
1910.215 B09
- Issued
- May 1, 2020
- Abate by
- May 22, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Samples Department - On or about 1/29/20, employees use a DeWalt DW758 8 inch bench grinder, operating at 3600 rpm, to grind stone surfaces. The tongue guard was adjusted on the left grinding wheel with an opening of 1/2 inch. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- May 1, 2020
- Abate by
- May 22, 2020
- Penalty
- Initial $6,554 · Current $0 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) Samples department - On or about 1/29/20, an employee used an air nozzle, operating at about 60 psi, to remove dust from the stone piece or stone product. Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $6554
1910.1053 H01
- Issued
- May 1, 2020
- Abate by
- May 22, 2020
- Penalty
- Initial $8,193 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1053(h)(1): The employer allowed dry sweeping or dry brushing where such activity could contribute to employee exposure to respirable crystalline silica and wet sweeping, HEPA-filtered vacuuming or other methods that minimize the likelihood of exposure were feasible: (a) Samples department - On or about 1/29/20, an employee was dry sweeping floor dust. Personal air sampling on another employee indicated an 8 hour TWA concentration of respirable crystalline silica of 15.5 ug/m3. The employer allowed dry sweeping where such activity could contribute to employee exposure to respirable crystalline silica. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $8193
1910.1053 H02 I
- Issued
- May 1, 2020
- Abate by
- May 22, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1053(h)(2)(i): The employer allowed compressed air to be used to clean clothing or surfaces where such activity could contribute to employee exposure to respirable crystalline silica without being used in conjunction with a ventillation system to capture blown dust: (a) Samples department - On or about 1/29/20, one employee used an air nozzle (operating at about 60 psi) to remove dust from the stone piece or stone product. Personal air sampling on this employee indicated an 8 hour TWA concentration of respirable crystalline silica of 15.5 ug/m3. The employer allowed compressed air to be used to clean clothing or surfaces where such activity could contribute to employee exposure to respirable crystalline silica without being used in conjunction with a ventillation system to capture blown dust. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Creative Stone MFG INC. DBA Coronado Stone Products
View Creative Stone MFG INC. DBA Coronado Stone Products's full OSHA safety record →
More inspections in this industry (NAICS 444190)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344592845.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.