GRAPEVINE, TX —
OSHA Inspection: TEXAS GUN EXPERIENCE
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of TEXAS GUN EXPERIENCE in 1901 S. MAIN ST., GRAPEVINE, TX 76051 (NAICS 332994). OSHA activity number 344611512.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TEXAS GUN EXPERIENCE
- Site address
- 1901 S. MAIN ST.
- City
- GRAPEVINE
- State
- TX
- ZIP
- 76051
- Mailing
- 1901 S. MAIN ST., GRAPEVINE, TX 76051
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332994
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 8, 2020
- Abate by
- May 6, 2020
- Penalty
- Initial $3,084 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks; On or about February 06, 2020, and at times prior thereto, at a workplace located at 1901 S. Main Street, Grapevine, Texas; employees operated a Jet drill press, serial number JT5906, with no guard over the rotating parts exposing employees to struck-by, caught-in and amputation hazards.
Recent events (2)
- — I (S) $1850.4
- — Z (S) $3084
1910.215 A04
- Issued
- Apr 8, 2020
- Abate by
- May 6, 2020
- Penalty
- Initial $3,084 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about February 06, 2020, and at times prior thereto, at a workplace located at 1901 S. Main Street, Grapevine, Texas; employees were operating a SKIL Grinder, S/N F0102338000, with no work rest installed exposing employees to severe finger cuts and abrasions.
Recent events (2)
- — I (S) $1850.4
- — Z (S) $3084
1910.215 B09
- Issued
- Apr 8, 2020
- Abate by
- May 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about February 06, 2020, and at times prior thereto, at a workplace located at 1901 S. Main Street, Grapevine, Texas; employees were operating a SKIL Grinder, S/N F0102338000, and no tongue guards were installed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1025 H01
- Issued
- Apr 8, 2020
- Abate by
- May 6, 2020
- Penalty
- Initial $3,856 · Current $2,314 Reduced
General-duty citation text
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations lead: On or about February 06, 2020, and at times prior thereto, at a workplace located at 1901 S. Main Street, Grapevine, Texas; lead contamination was found on numerous working surfaces exposing employees to health hazards.
Recent events (2)
- — I (S) $2313.6
- — Z (S) $3856
1910.1025 L01 II
- Issued
- Apr 8, 2020
- Abate by
- May 6, 2020
- Penalty
- Initial $3,084 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.1025(l)(1)(ii): The employer did not train each employee who is subject to exposure to lead at or above the action level, or for whom the possibility of skin or eye irritation exists , in accordance with the requirements of this section. The employer did not institute a training program and ensure employee participation in the program: On or about February 06, 2020, and at times prior thereto, at a workplace located at 1901 S. Main Street, Grapevine, Texas; employees working with and exposed to lead had not been trained on the hazards associated with lead exposure and measures employees can take to protect themselves.
Recent events (2)
- — I (S) $1850.4
- — Z (S) $3084
More inspections at Texas GUN Experience
View Texas GUN Experience's full OSHA safety record →
More inspections in this industry (NAICS 332994)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344611512.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.