NEW ALBANY, MS ·
OSHA Inspection: VIP CINEMA, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VIP CINEMA, LLC in 101 INDUSTRIAL DR., NEW ALBANY, MS 38652 (NAICS 337127). OSHA activity number 344613138.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VIP CINEMA, LLC
- Site address
- 101 INDUSTRIAL DR.
- City
- NEW ALBANY
- State
- MS
- ZIP
- 38652
- Mailing
- 101 INDUSTRIAL DR., NEW ALBANY, MS 38652
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 255
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Mar 16, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $9,831 · Current $3,932 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. (a) Facility - On or about February 06, 2020 the employer did not ensure procedures specific to each machine were developed, documented and utilized for the control of energy sources of equipment such as but not limited to the electrical and pneumatic energy with the sewing machines, when employees performed servicing and maintenance exposing employees to caught in hazards.
Recent events (2)
- · I (S) $3932
- · Z (S) $9831
1910.147 C06 I
- Issued
- Mar 16, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Facility - On or about February 06, 2020 the employer had not performed the required periodic inspection of their energy control procedures for equipment such as but not limited to the Blow Fill Machines, prior to employees performing service and maintenance, exposing employees to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 H04
- Issued
- Mar 16, 2020
- Penalty
- Initial $8,193 · Current $3,277 Reduced
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: (a) Research and Development; On or about February 06, 2020 the employer did not ensure that the Kobalt Compound Miter saw would retract to the starting position when released, exposing employees to amputation hazards.
Recent events (2)
- · I (S) $3277
- · Z (S) $8193
1910.213 S06
- Issued
- Mar 16, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(s)(6): Cleanliness around working machinery was not maintained to prevent fire hazards and ensure the effective functioning of guards: (a) Research and Development - On or about February 06, 2020 the employer did not ensure that the sawdust in a Kobalt Compound Miter saw was removed to allow the machine guarding to function properly, exposing employees to amputation hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 C04 I
- Issued
- Mar 16, 2020
- Penalty
- Initial $9,831 · Current $3,932 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft. (a) Research and Development - On or about February 06, 2020 the employer did not ensure that a rotating shaft on the rear of a blow machine was guarded, exposing employees to a caught-in hazard.
Recent events (2)
- · I (S) $3932
- · Z (S) $9831
1910.242 B
- Issued
- Mar 16, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $9,831 · Current $3,932 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. (a) Research and Development; On or about February 06, 2020 the employer did not ensure that compressed air nozzles were reduced to 30 psi. Employees were exposed to a struck-by hazard. (b) Sewing Department; On or about February 06, 2020 the employer did not ensure that compressed air nozzles were reduced to 30 psi. Employees were exposed to a struck-by hazard.
Recent events (2)
- · I (S) $3932
- · Z (S) $9831
More inspections in this industry (NAICS 337127)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344613138.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.