PIEDMONT, AL —
OSHA Inspection: STRYKER TRAILERS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of STRYKER TRAILERS, LLC in 4971 AL HIGHWAY 21 N, PIEDMONT, AL 36272 (NAICS 336214). OSHA activity number 344613815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STRYKER TRAILERS, LLC
- Site address
- 4971 AL HIGHWAY 21 N
- City
- PIEDMONT
- State
- AL
- ZIP
- 36272
- Mailing
- 4971 AL HIGHWAY 21 N, PIEDMONT, AL 36272
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336214
- Employees
- 40
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Apr 2, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On or about 02/05/2020 - Plant area, employees operating forklifts and performing activities such as unloading trucks and stacking trailers had not completed training and evaluation as required, exposing other employees to possible struck-by and crushed-by hazards.
Recent events (1)
- — Z (S) $5398
1910.178 P01
- Issued
- Apr 2, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) On or about 02/05/2020 - Plant Area, employees were utilizing a Toyota forklift, Serial No. 34494, with defective tires.
Recent events (1)
- — Z (S) $5398
1910.179 G01 V
- Issued
- Apr 2, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.179(g)(1)(v): Pendant control box(es) were not clearly marked for identification of functions: (a) On or about 02/05/2020 - Paint department, a (Milwaukee brand) remote for a remote-operated hoist was covered in black paint making the identification of the functions illegible and exposing employees to struck-by hazards. (b) On or about 02/05/2020 - Paint department, a (Milwaukee brand) remote for a remote-operated hoist was covered in black paint making the identification of the functions illegible and exposing employees to struck-by hazards. (c) On or about 02/05/2020 - Paint department, a (Milwaukee brand) remote for a remote-operated hoist was covered in black paint making the identification of the functions illegible and exposing employees to struck-by hazards. (d) On or about 02/05/2020 - Paint department, a (Milwaukee brand) remote for a remote-operated hoist was covered in black paint making the identification of the functions illegible and exposing employees to struck-by hazards.
Recent events (1)
- — Z (S) $5398
1910.212 A01
- Issued
- Apr 2, 2020
- Abate by
- Apr 14, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 02/05/2020 - Welding area, the rotating part for the Delta drill press (Serial No. 9404) was not guarded, exposing employees to injuries such as, but not limited to, lacerations, broken bones, and amputations.
Recent events (1)
- — Z (S) $5398
1910.253 B04 III
- Issued
- Apr 2, 2020
- Abate by
- Apr 28, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet: (a) On or about 02/05/2020 - Gas storage area, oxygen and acetylene cylinders were stored together creating a fire hazard.
Recent events (1)
- — Z (S) $5398
1910.179 J01 II B
- Issued
- Apr 2, 2020
- Abate by
- May 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(1)(ii)(b): 29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: (a) On or about 02/05/2020 - Paint department, the employer did not ensure that periodic inspections were conducted for four Milwaukee brand remote-operated hoists.
Recent events (1)
- — Z (O) $0
More inspections at Stryker Trailers, LLC
View Stryker Trailers, LLC's full OSHA safety record →
More inspections in this industry (NAICS 336214)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344613815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.