HAWKINS, WI ·
OSHA Inspection: JELD-WEN, INC. HAWKINS WINDOW DIVISION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of JELD-WEN, INC. HAWKINS WINDOW DIVISION in 811 FACTORY ST., HAWKINS, WI 54530 (NAICS 321911). OSHA activity number 344614003.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JELD-WEN, INC. HAWKINS WINDOW DIVISION
- Site address
- 811 FACTORY ST.
- City
- HAWKINS
- State
- WI
- ZIP
- 54530
- Mailing
- P.O. BOX 140, HAWKINS, WI 54530
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 367
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.178 A04
- Issued
- May 28, 2020
- Abate by
- Jun 18, 2020
- Penalty
- Initial $6,361 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a) Production floor; The employer did not obtain written manufacturer approval for the use of the front end attachment on the Hyster forklift.
Recent events (3)
- · F (S) $0
- · C (S) $6361
- · Z (S) $6361
1910.178 A05
- Issued
- May 28, 2020
- Abate by
- Jun 18, 2020
- Penalty
- Initial $0 · Current $3,181
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: (a) Production floor; The Hyster forklift was not marked to identify the combined weight of the truck and the front end attachment at maximum elevation, with its load centered.
Recent events (3)
- · F (O) $3181
- · C (S) $0
- · Z (S) $0
1910.212 A03 II
- Issued
- May 28, 2020
- Abate by
- Jun 18, 2020
- Penalty
- Initial $13,494 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Specialty machining; The Tauring metal bender was not equipped with adequate guarding at the point of operation.
Recent events (3)
- · F (S) $0
- · C (S) $13494
- · Z (S) $13494
1910.37 B02
- Issued
- May 28, 2020
- Abate by
- Jun 11, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": (a) Hog room; The exit door was not marked to indicate that it was an exit.
Recent events (3)
- · F (O) $0
- · C (O) $0
- · Z (O) $0
More inspections at Jeld-Wen, INC. Hawkins Window Division
View Jeld-Wen, INC. Hawkins Window Division's full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344614003.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.