Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: SUMATIC COMPANY, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of SUMATIC COMPANY, INC. in 102 DEWITT STREET, GARFIELD, NJ 07026 (NAICS 332721). OSHA activity number 344626437.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sumatic Company, INC. for free Get an email when a new federal OSHA severe-injury report for Sumatic Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
102 DEWITT STREET
City
GARFIELD
State
NJ
ZIP
07026
Mailing
102 DEWITT STREET, GARFIELD, NJ 07026
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332721
Employees
2
Ownership type
Private (A)

5 citations on file for this inspection.

1910.219 D01

Serious Gravity 5 1 instance 1 exposed
Issued
May 11, 2020
Penalty
Initial $2,313 · Current $1,157 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    a) Production Area: The pulley on the Escomatic coil-fed lathe machine was less than seven feet from the floor and unguarded. The employer did not ensure that the pulley on the lathe machine was guarded, thus exposing employees to an amputation hazard, on or about 2/13/20.
Recent events (2)
  • · I (S) $1156.5
  • · Z (S) $2313

1910.219 E03 I

Serious Gravity 5 1 instance 1 exposed
Issued
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  a) Production Area: The inclined belt on the Escomatic coil-fed lathe machine was less than seven feet from the floor and unguarded. The employer did not ensure that the inclined belt on the lathe machine was guarded, thus exposing employees to an amputation hazard, on or about 2/13/20.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Shop-Wide: Employees are required to work with hazardous chemicals, including, but not limited to, Klean Strip acetone, oil and Peppermates silicone aerosol spray. The employer did not develop and implement a written hazard communication program, on or about 2/13/20.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 G01

Other-than-serious 1 instance 1 exposed
Issued
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a) Shop-Wide: Employees are required to work with hazardous chemicals, including, but not limited to, Klean Strip acetone, Peppermates silicone aerosol spray, and oil. The employer did not maintain safety data sheets for hazardous chemicals used in the workplace, on or about 2/13/20.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Shop-Wide: Employees are required to work with hazardous chemicals, including, but not limited to, Klean Strip acetone, Peppermates silicone aerosol spray, and oil. The employer did not provide employees with information and training on the use of hazardous chemicals at the time of initial work assignment, on or about 2/13/20.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344626437.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.