WILLIS, TX ·
OSHA Inspection: FELIPE SIFUENTES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FELIPE SIFUENTES in 205 JASMIN BLUE CT, WILLIS, TX 77318 (NAICS 238130). OSHA activity number 344631783.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FELIPE SIFUENTES
- Site address
- 205 JASMIN BLUE CT
- City
- WILLIS
- State
- TX
- ZIP
- 77318
- Mailing
- 10138 NW PARK DR., HOUSTON, TX 77086
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $2,892 · Current $2,892
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about February 14, 2020, on the front side of the residential building being constructed, where an employee was exposed to struck by hazards while working without a hard hat.
Recent events (1)
- · Z (S) $2892
1926.102 A01
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. On or about February 14, 2020, on the front side of the residential building being constructed, where an employee was exposed to struck by hazards while operating a Makita brand circular saw without safety eye protection.
Recent events (1)
- · Z (S) $0
1926.304 D
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $2,892 · Current $2,892
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about February 14, 2020, on the front side of the residential building being constructed, where an employee was exposed to struck by hazards while operating a Makita brand circular saw without a guard above the base plate.
Recent events (1)
- · Z (S) $2892
1926.451 B02
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: On or about February 14, 2020, at the residential construction site where an employee was exposed to a fall hazard, where an employee was exposed to a fall hazard while working on a scaffold platform / walkway that was not 18 inches wide.
Recent events (1)
- · Z (S) $4048
1926.451 C02
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, or uprights did not bear on base plates, mud sills or other adequate firm foundation: On or about February 14, 2020, at the residential construction site being constructed, where an employee was exposed to a fall hazard while working from a scaffold without mud sills on all scaffold legs.
Recent events (1)
- · Z (S) $0
1926.451 G01 VII
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section: On or about February 14, 2020, at the residential construction site being constructed where an employee was exposed to a fall hazard while working on a scaffold without a personal fall arrest systems or guardrail systems in place.
Recent events (1)
- · Z (S) $4048
1926.1053 B01
- Issued
- Apr 9, 2020
- Abate by
- Apr 15, 2020
- Penalty
- Initial $2,892 · Current $2,892
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about February 14, 2020, at the residential construction site, where an employee was exposed to a fall hazard when accessing the roof with a ladder whose side rails did not extend at least 3 feet above the landing surface.
Recent events (1)
- · Z (S) $2892
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344631783.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.