ECRU, MS ·
OSHA Inspection: FUSION FURNITURE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FUSION FURNITURE INC. in 957 PONTOTOC COUNTY INDUSTRIAL PARK ROAD, ECRU, MS 38841 (NAICS 337121). OSHA activity number 344633110.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FUSION FURNITURE INC.
- Site address
- 957 PONTOTOC COUNTY INDUSTRIAL PARK ROAD
- City
- ECRU
- State
- MS
- ZIP
- 38841
- Mailing
- P.O. BOX 366, ECRU, MS 38841
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337121
- Employees
- 450
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C06 I
- Issued
- Apr 22, 2020
- Abate by
- May 14, 2020
- Penalty
- Initial $13,494 · Current $13,494
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Facility - On or about February 13, 2020 the employer had not performed the required periodic inspection of their energy control procedures for equipment such as but not limited to Picker Number 1, prior to employees performing service and maintenance, exposing employees to amputation hazards.
Recent events (1)
- · Z (S) $13494
1910.147 C07 I B
- Issued
- Apr 22, 2020
- Abate by
- May 14, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Each affected employee shall be instructed in the purpose and use of the energy control procedure. (a) Throughout the production area - On or about February 13, 2020 the employer had not provided training to the affected employees on the hazardous energy control program exposing employees to amputation hazards.
Recent events (1)
- · Z (S) $0
1910.147 C07 I C
- Issued
- Apr 22, 2020
- Abate by
- May 14, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(C): Employees whose work operations were in an area where energy control procedures were utilized were not instructed about the procedure. (a) Throughout the production area - On or about February 13, 2020 the employer had not provided training to employees on the hazardous energy control program at the facility, exposing employees to amputation hazards.
Recent events (1)
- · Z (S) $0
1910.178 L06
- Issued
- Apr 22, 2020
- Abate by
- May 14, 2020
- Penalty
- Initial $8,193 · Current $8,193
General-duty citation text
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: (a) Facility - On or about February 13, 2020 the employer did not have the training certification for a forklift operator exposing employees to struck-by hazards.
Recent events (1)
- · Z (S) $8193
1910.219 C04 I
- Issued
- Apr 22, 2020
- Penalty
- Initial $8,193 · Current $8,193
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft. (a) Picker Number 1 - On or about February 13, 2020 the employer did not ensure that a rotating shafts were guarded, exposing employees to a caught-in hazard.
Recent events (1)
- · Z (S) $8193
More inspections at Fusion Furniture INC.
View Fusion Furniture INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337121)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344633110.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.