Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: SALEM WOOD PRODUCTS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SALEM WOOD PRODUCTS in 133 COUNTY ROAD 4150, SALEM, MO 65560 (NAICS 321999). OSHA activity number 344633268.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Salem Wood Products for free Get an email when a new federal OSHA severe-injury report for Salem Wood Products is published. One employer, no account, unsubscribe in one click.
Establishment
SALEM WOOD PRODUCTS
Site address
133 COUNTY ROAD 4150
City
SALEM
State
MO
ZIP
65560
Mailing
133 COUNTY ROAD 4150, SALEM, MO 65560
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321999
Employees
62
Ownership type
Private (A)

6 citations on file for this inspection.

1910.29 B02 III

Other-than-serious 2 instances 25 exposed
Issued
Feb 27, 2020
Penalty
Initial $3,441 · Current $2,409 Reduced
29 CFR 1910.29(b)(2)(iii): Intermediate vertical members were not installed so they were no more than 19 inches apart:    At 133 County Road 4150, specifically inside of the Bolt Pin, the two, stair rails attached to a metal flight of stair, four risers high were not equipped with intermediate rails.  This violation was noted on 02/19/20.
Recent events (2)
  • · I (O) $2408.7
  • · Z (S) $3441

1910.147 C04 I

Deleted Serious Gravity 5 1 instance 5 exposed
Issued
Feb 27, 2020
Abate by
Apr 14, 2020
Penalty
Initial $4,588 · Current $0 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  At 133 County Road 4150, Salem, Missouri, on 02/19/20, specific procedures were not developed and utilized for machinery such as, but not limited to, the following:  a/ Volvo Front End Loader, m/n L70G, s/n 614223.  b/  Volvo Front End Loader, m/n L70H, s/n 622088.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4588

1910.147 C06 I

Deleted Serious Gravity 5 3 instances 5 exposed
Issued
Feb 27, 2020
Abate by
Apr 14, 2020
Penalty
Initial $4,588 · Current $0 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  At 133 County Road 4150, Salem, Missouri, on 02/19/20, periodic inspections were not performed on the following procedures:  a/  Resaw Machine.  b/  Debarker Machine.  c/  Chainsaw Infeed Conveyor.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4588

1910.335 A01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 27, 2020
Abate by
Apr 14, 2020
Penalty
Initial $5,735 · Current $4,015 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed:    At 133 County Road 4150, Salem, Missouri, employee(s) performing minor electrical work on circuit breaker panel boxes and fuse boxes were only wearing safety glasses and electrical gloves while verifying that the electrical energy had been isolated.  This violation was noted on 02/19/20.
Recent events (2)
  • · I (S) $4014.5
  • · Z (S) $5735

1910.335 A01 IV

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 27, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.335(a)(1)(iv): Employees exposed to the danger of head injury from electric shock or burns due to contact with exposed energized parts did not wear nonconductive head protection:  At 133 County Road 4150, Salem, Missouri, employee(s) performing minor electrical work on circuit breaker panel boxes and fuse boxes were not wearing protective head gear while verifying that the electrical energy had been isolated.  This violation was noted on 02/19/20.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1904.32 B04 III

Deleted Other-than-serious 3 instances 62 exposed
Issued
Feb 27, 2020
Abate by
Apr 14, 2020
Penalty
Initial $1,147 · Current $0 Reduced
29 CFR 1904.32(b)(4)(iii): The highest ranking company official working at the establishment; or  At 133 County Road 4150, Salem, Missouri, the OSHA 300A Form for 2017, 2016, and 2015 was signed by the benefits administrator.  This violation was noted on 02/19/20.
Recent events (2)
  • · I (O) $0
  • · Z (O) $1147

View Salem Wood Products's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344633268.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.